Skip to main content
eScholarship
Open Access Publications from the University of California

UC Riverside

UC Riverside Electronic Theses and Dissertations bannerUC Riverside

Development of a Fischer-Tropsch Gasoline Process for the Steam Hydrogasification Technology

Abstract

The CE-CERT Steam Hydrogasification Technology efficiently converts carbonaceous materials to high energetic synthesis gas. This thesis investigates the direct production of gasoline range liquid hydrocarbons with high iso-paraffin content from synthesis gas. The goal is to provide a process to efficiently produce renewable gasoline that can be used directly without modification of engine or infrastructure.

An H-ZSM-5 shell Co/Al2O3 Fischer-Tropsch catalyst is prepared using a secondary-growth hydrothermal synthesis method. The catalyst not only synthesizes long-chain hydrocarbons from synthesis gas, but also cracks and isomerizes them into gasoline-range hydrocarbons with high iso-paraffin content. Characterization results show that the catalyst has good H-ZSM-5 shell coverage with no cracks or pinholes, with a shell thickness is around 4.29 μm. H-ZSM-5 shell composition is confirmed by EDX and XRD. In addition, the zeolite-shell catalyst has a 10% increase of surface area, compared to a conventional Fischer-Tropsch catalyst.

A high-temperature high-pressure lab-scale continuous Fischer-Tropsch reactor with LabVIEW automation system was designed and built. The reactor system has online gas and liquid sampling capabilities. It also has a PID controller with gain scheduling for precise heating control during Fischer-Tropsch synthesis test. Safety during reactor operation is ensured with alarms and automatic emergency response system.

Performance of a H-ZSM-5 shell Co/Al2O3 Fischer-Tropsch catalyst was investigated under various conditions. A maximum CO conversion of 97.1%, with a highest gasoline yield of 58% and iso-paraffin selectivity of 14.3%, was obtained. Sensitivity analysis shows that reaction temperature significantly affects CO conversion and iso-paraffin selectivity. Catalyst silicon to aluminum ratio also influences iso-paraffin selectivity, but has no effect on CO conversion. In addition, H-ZSM-5 shell Co/Al2O3 Fischer-Tropsch catalyst has much less carbon deposition than conventional catalyst, which can help reduce catalyst deactivation rate.

Main Content
For improved accessibility of PDF content, download the file to your device.
Current View