Skip to main content
eScholarship
Open Access Publications from the University of California

Lidar characterization of crystalline silica generation and gravel plant

Abstract

Light detection and ranging (Lidar) remote sensing two-dimensional vertical and horizontal scans collected downwind of a sand and gravel plant were used to evaluate the generation and transport of geologic fugitive dust emitted by quarry operations. The lidar data give unsurpassed spatial resolution of the emitted dust, but lack quantitative particulate matter (PM) mass concentration data. Estimates of the airborne PM10 and crystalline silica concentrations were determined using linear relationships between point monitor PM10 and quartz content data with the lidar backscatter signal collected from the point monitor location. Lidar vertical profiles at different distances downwind from the plant were used to quantify the PM10 and quartz horizontal fluxes at 2-m vertical resolution as well as off-site emission factors. Emission factors on the order of 65–110 kg of PM10 (10–30 kg quartz) per daily truck activity or 2–4 kg/t product shipped (0.5–1 kg quartz/t) were quantified for this facility. The lidar results identify numerous elevated plumes at heights >30m and maximum plume heights of 100m that cannot be practically sampled by conventional point sampler arrays. The PM10 and quartz mass flux was greatest at 10–25mheight and decreased with distance from the main operation. Measures of facility activity were useful for explaining differences in mass flux and emission rates between days. The study results highlight the capabilities of lidar remote sensing for determining the spatial distribution of fugitive dust emitted by area sources with intermittent and spatially diverse dust generation rates.

Main Content
For improved accessibility of PDF content, download the file to your device.
Current View