A large bore 'High-Temperature Superconductor Cable Test Facility Magnet' for testing advanced cables and inserts in high transverse field is in its design phase. This magnet will be the core component of a facility for developing conductors and accelerator magnets operating above 15 T, an enabling technology for next-generation fusion devices using magnetic confinement of plasma and for future energy frontier colliders. The procurement of Nb3Sn conductor, fabrication of cables, winding of coils, and assembly of the dipole magnet will be done at Lawrence Berkeley National Laboratory (LBNL) and the test pit and cryostat will be constructed at Fermi National Accelerator Laboratory. This article will present the conductor element of the LBNL project, specifically cable design parameters (based on the Bruker OST RRP^{\bigcirc \!\!\!\! {\hbox{R}}} Nb3Sn superconducting wire) and the development phase cable fabrication experience. Challenges of the cable fabrication will be discussed. The wire and cable planned for this magnet are similar to those under study for the Future Circular Collider and other large facility magnets. The successful fabrication of the development cable has positive implications for these other projects.

The high-luminosity Large Hadron Collider (HL-LHC) project aims at allowing to increase the collisions in the LHC by a factor of ten in the decade 2025-2035. One essential element is the superconducting magnet around the interaction region points, where the large aperture magnets will be installed to allow to further reduce the beam size in the interaction point. The core of this upgrade is the Nb3Sn triplet, made up of 150-mm aperture quadrupoles in the range of 7-8 m. The project is being shared between the European Organization for Nuclear Research and the US Accelerator Upgrade Program, based on the same design, and on the two strand technologies. The project is ending the short model phase, and entering the prototype construction. We will report on the main results of the short model program, including the quench performance and field quality. A second important element is the 11 T dipole that replaces a standard dipole making space for additional collimators. The magnet is also ending the model development and entering the prototype phase. A critical point in the design of this magnet is the large current density, allowing increase of the field from 8 to 11 T with the same coil cross section as in the LHC dipoles. This is also the first two-in-one Nb3Sn magnet developed so far. We will report the main results on the test and the critical aspects.

A next step of energy increase of hadron colliders beyond the LHC requires high-field superconducting magnets capable of providing a dipolar field in the range of 16 T in a 50-mm aperture with accelerator quality. These characteristics could meet the requirements for an upgrade of the LHC to twice the present beam energy or for a 100-TeV center of mass energy future circular collider. This paper summarizes the activities and plans for the development of these magnets, in particular within the 16 T Magnet Technology Program, the WP5 of the EuroCirCol, and the U.S. Magnet Development Program.

A future circular collider (FCC) with a center-of-mass energy of 100 TeV and a circumference of around 100 km, or an energy upgrade of the LHC (HE-LHC) to 27 TeV require bending magnets providing 16 T in a 50-mm aperture. Several development programs for these magnets, based on Nb3Sn technology, are being pursued in Europe and in the U.S. In these programs, cos-theta, block-type, common-coil, and canted-cos-theta magnets are explored; first model magnets are under manufacture; limits on conductor stress levels are studied; and a conductor with enhanced characteristics is developed. This paper summarizes and discusses the status, plans, and preliminary results of these programs.

By the end of October 2022, the US HL-LHC Accelerator Upgrade Project (AUP) had completed fabrication of ten MQXFA magnets and tested eight of them. The MQXFA magnets are the low-beta quadrupole magnets to be used in the Q1 and Q3 Inner Triplet elements of the High Luminosity LHC. This AUP effort is shared by BNL, Fermilab, and LBNL, with strand verification tests at NHMFL. An important step of the AUP QA plan is the testing of MQXFA magnets in a vertical cryostat at BNL. The acceptance criteria that could be tested at BNL were all met by the first four production magnets (MQXFA03-MQXFA06). Subsequently, two magnets (MQXFA07 and MQXFA08) did not meet some of the criteria and were disassembled. Lessons learned during the disassembly of MQXFA07 caused a revision to the assembly specifications that were used for MQXFA10 and subsequent magnets. In this article, we present a summary of: 1) the fabrication and test data for all the MQXFA magnets; 2) the analysis of MQXFA07/A08 test results with characterization of the limiting mechanism; 3) the outcome of the investigation, including the lessons learned during MQXFA07 disassembly; and 4) the finite element analysis correlating observations with test performance.