The mechanical response of cellular materials with spinodal topologies is numerically and experimentally investigated. Spinodal microstructures are generated by the numerical solution of the Cahn-Hilliard equation. Two different topologies are investigated: ‘solid models,’ where one of the two phases is modeled as a solid material and the remaining volume is void space; and ‘shell models,’ where the interface between the two phases is assumed to be a solid shell, with the rest of the volume modeled as void space. In both cases, a wide range of relative densities and spinodal characteristic feature sizes are investigated. The topology and morphology of all the numerically generated models are carefully characterized to extract key geometrical features and ensure that the distribution of curvatures and the aging law are consistent with the physics of spinodal decomposition. Finite element meshes are generated for each model, and the uniaxial compressive stiffness and strength are extracted. We show that while solid spinodal models in the density range of 30–70% are relatively inefficient (i.e., their strength and stiffness exhibit a high-power scaling with relative density), shell spinodal models in the density range of 0.01–1% are exceptionally stiff and strong. Spinodal shell materials are also shown to be remarkably imperfection insensitive. These findings are verified experimentally by in-situ uniaxial compression of polymeric samples printed at the microscale by Direct Laser Writing (DLW). At low relative densities, the strength and stiffness of shell spinodal models outperform those of most lattice materials and approach theoretical bounds for isotropic cellular materials. Most importantly, these materials can be produced by self-assembly techniques over a range of length scales, providing unique scalability.

Gallium oxide thin films were grown by ion beam sputter deposition (IBSD) at room temperature on Si substrates with systematically varied process parameters: primary ion energy, primary ion species (O 2 + and Ar +), sputtering geometry (ion incidence angle α and polar emission angle β), and O 2 background pressure. No substrate heating was applied because the goal of these experiments was to investigate the impact of the energetic film-forming species on thin film properties. The films were characterized with regard to film thickness, growth rate, crystallinity, surface roughness, mass density, elemental composition and its depth profiles, and optical properties. All films were found to be amorphous with a surface roughness of less than 1 nm. The stoichiometry of the films improved with an increase in the energy of film-forming species. The mass density and the optical properties, including the index of refraction, are correlated and show a dependency on the kinetic energy of the film-forming species. The ranges of IBSD parameters, which are most promising for further improvement of the film quality, are discussed.

Viral infections are associated with increased incidence of severe sepsis. Particularly during the early stages, type I interferons (IFNs) are known mediators of detrimental effects. However, the functional role of early interferon β (IFNβ) and its cellular source during sepsis in the context of preexisting viral infections has not been defined. Using the colon ascendens stent peritonitis (CASP) model, we demonstrate that IFNβ-/- and type I IFN receptor (IFNAR1)-/- mice were less susceptible to sepsis after pre-stimulation with the viral mimetic poly(I:C). Wild type (WT) mice treated with poly(I:C) exhibited altered expression patterns of TNF and IL-12p40 during CASP which were dependent on IFNβ or IFNAR1, suggesting a mechanism for the increased sepsis susceptibility of WT mice. Using a double cytokine reporter mouse model, we present novel data on the simultaneous expression of IFNβ and IL-12p40 on a single cell level during polymicrobial sepsis in vivo. Conventional dendritic cells (cDCs) were identified as primary source of IFNβ and the protective cytokine IL-12p40 after CASP surgery irrespective of poly(I:C) pre-stimulation. These data demonstrated that if polymicrobial sepsis is preceded by a viral infection, IFNβ and IL-12p40 are expressed by polyfunctional cDCs suggesting that these cells can play both detrimental and beneficial roles during sepsis development.

Deposition of epitaxial oxide semiconductor films using physical vapor deposition methods requires a detailed understanding of the role of energetic particles to control and optimize the film properties. In the present study, Ga 2 O 3 thin films are heteroepitaxially grown on Al 2 O 3 (0001) substrates using oxygen ion beam sputter deposition. The influence of the following relevant process parameters on the properties of the thin films is investigated: substrate temperature, oxygen background pressure, energy of primary ions, ion beam current, and sputtering geometry. The kinetic energy distributions of ions in the film-forming flux are measured using an energy-selective mass spectrometer, and the resulting films are characterized regarding crystalline structure, microstructure, surface roughness, mass density, and growth rate. The energetic impact of film-forming particles on the thin film structure is analyzed, and a noticeable decrease in crystalline quality is observed above the average energy of film-forming Ga + ions around 40 eV for the films grown at a substrate temperature of 725 ° C.

Broadly neutralizing monoclonal antibodies protect against infection with HIV-1 in animal models, suggesting that a vaccine that elicits these antibodies would be protective in humans. However, it has not yet been possible to induce adequate serological responses by vaccination. Here, to activate B cells that express precursors of broadly neutralizing antibodies within polyclonal repertoires, we developed an immunogen, RC1, that facilitates the recognition of the variable loop 3 (V3)-glycan patch on the envelope protein of HIV-1. RC1 conceals non-conserved immunodominant regions by the addition of glycans and/or multimerization on virus-like particles. Immunization of mice, rabbits and rhesus macaques with RC1 elicited serological responses that targeted the V3-glycan patch. Antibody cloning and cryo-electron microscopy structures of antibody-envelope complexes confirmed that immunization with RC1 expands clones of B cells that carry the anti-V3-glycan patch antibodies, which resemble precursors of human broadly neutralizing antibodies. Thus, RC1 may be a suitable priming immunogen for sequential vaccination strategies in the context of polyclonal repertoires.