Anion-exchange-membrane electrolysis is positioned to play a key role in the predicted exponential growth of green hydrogen technology with essential R&D advances. We reveal key design parameters essential to commercialization. First, stable alkaline oxygen-evolution reaction catalysts with high electronic conductivity and minimal surface reconstruction during operation must be designed. Alkaline catalyst layers must also be applied to the membrane electrode assembly with scalable, industrially relevant techniques. Second, ionomer oxidation mitigation strategies must be developed. This approach could also target other creative catalyst layer design, such as phase-separation control to protect oxidation-prone organic components or catalyst engineering to direct selectivity for hydroxide over polymer oxidation. If competitive efficiency and durability can be achieved in pure water, AEM electrolysis has the potential to become a dominant electrolyzer technology.

Electrochemistry is an established discipline with modern frontiers spanning energy conversion and storage, neuroscience, and organic synthesis. In spite of the expanding opportunities for academic and industrial electrochemists, particularly in the growing energy-storage sector, rigorous training of electrochemists is generally lacking at academic institutions in the United States. In this perspective, we highlight the core concepts of electrochemistry and discuss ways in which it has been historically taught. We identify challenges faced when teaching inherently interdisciplinary electrochemical concepts and discuss how technology provides new tools for teaching, such as inexpensive electronics and open-source software, to help address these challenges. Finally, we outline example programs and discuss how new tools and approaches can be brought together to prepare scientists and engineers for careers in electrochemical technology where they can accelerate the research, development, and deployment of the clean energy technology essential to combat climate change in the coming decades.

The water-dissociation (WD) reaction (H2O → H+ + OH−) affects the rates of electrocatalytic reactions and the performance of bipolar membranes (BPMs), but how WD is driven by voltage and catalyzed is not understood. We report BPM electrolyzers with two reference electrodes (REs) to measure temperature-dependent WD current and overpotential (ηwd) without soluble electrolyte. Using TiO2-P25-nanoparticle catalyst and Arrhenius-type analysis, we found Ea,wd of 25–30 kJ/mol, independent of ηwd, and a pre-exponential factor proportional to ηwd that decreases ∼10-fold in D2O. We propose a new WD mechanism where metal-oxide nanoparticles, polarized by the BPM-junction voltage, serve as proton (1) acceptors (from water) on the negatively charged side of the particle to generate free OH−, (2) donors on the positively charged side to generate H3O+, and (3) surface proton conductors that connect spatially separate donor/acceptor sites. Increasing electric field with ηwd orients water for proton transfer, increasing the pre-exponential factor, but is insufficient to lower Ea.

Water dissociation (WD, H2O → H+ + OH-) is the core process in bipolar membranes (BPMs) that limits energy efficiency. Both electric-field and catalytic effects have been invoked to describe WD, but the interplay of the two and the underlying design principles for WD catalysts remain unclear. Using precise layers of metal-oxide nanoparticles, membrane-electrolyzer platforms, materials characterization, and impedance analysis, we illustrate the role of electronic conductivity in modulating the performance of WD catalysts in the BPM junction through screening and focusing the interfacial electric field and thus electrochemical potential gradients. In contrast, the ionic conductivity of the same layer is not a significant factor in limiting performance. BPM water electrolyzers, optimized via these findings, use ~30-nm-diameter anatase TiO2 as an earth-abundant WD catalyst, and generate O2 and H2 at 500 mA cm-2 with a record-low total cell voltage below 2 V. These advanced BPMs might accelerate deployment of new electrodialysis, carbon-capture, and carbon-utilization technology.

Charge-carrier-selective interfaces between electrocatalyst particles and semiconductor light absorbers are critical for solar photochemistry, but controlling their properties is challenging. Using thin films and nanoparticle arrays of Pt hydrogen-evolution catalysts on p-InP (a high-performance photocathode material), along with macroscopic and nanoscopic electrical and chemical analysis, we show how hydrogen alloying, the pinch-off effect for nanoscale contacts, and the formation of a native surface oxides all play different roles in creating charge-carrier-selective junctions. The new insights can be broadly applied to photocathodes, photoanodes, and overall water-splitting systems to control charge-carrier selectivity and improve performance.

Writing in Joule, Surendranath and coworkers report intrinsic hydrogen-evolution-reaction activity and kinetic parameters for Pt and Au electrodes using "innocent” buffers that don't substantially affect electrode kinetics. A pH- and potential-dependent coverage of metal-H species is proposed to modulate apparent activity, findings that are important for a range of electrochemical technologies.

Bipolar membranes are emerging as attractive solid electrolytes for water electrolysis, electrochemical CO2 reduction, and CO2 capture by base from electrodialysis. The development of these technologies is currently hampered by the resistance of current commercial materials under reversed bias, as well as interfacial incompatibility between the layers that can lead to delamination. This letter reports a divergent route to a nonfluorinated TiO2-catalyzed bipolar membrane, where the interfacial compatibility is governed by constructing the cation/anion exchange layers from the same backbone chemistry. We show that this BPM design concept has the potential to drastically enhance the adhesion strength at the interfacial junction, without compromising rate capability under bipolar membrane water electrolysis conditions.

Concentrated water-in-salt electrolytes (WiSEs) are used in aqueous batteries and to control electrochemical reactions for fuel production. The hydrogen evolution reaction is a parasitic reaction at the negative electrode that limits cell voltage in WiSE batteries and leads to self-discharge, and affects selectivity for electrosynthesis. Mitigating and modulating these processes is hampered by a limited fundamental understanding of HER kinetics in WiSEs. Here, we quantitatively assess how thermodynamics, kinetics, and interface layers control the apparent HER activities in 20 m LiTFSI. When the LiTFSI concentration is increased from 1 to 20 m, an increase in proton activity causes a positive shift in the HER equilibrium potential of 71 mV. The exchange current density, i_o, derived from the HER branch for 20 m LiTFSI in 98% purity (0.56 ± 0.05 μA/cm_Pt²), however, is 8 times lower than for 20 m LiTFSI in 99.95% (4.7 ± 0.2 μA/cm_Pt²) and 32 times lower than for 1 m LiTFSI in 98% purity (18 ± 1 μA/cm_Pt²), demonstrating that the WiSE's impurities and concentration are both central in significantly suppressing HER kinetics. The ability and applicability of the reported methods are extended by examining additional WiSEs formulations made of acetates and nitrates.

Anion-exchange-membrane water electrolysis (AEMWE) is an emerging technology for scalable hydrogen production. AEMWE has poor durability when operating without supporting electrolyte due to the oxidation of ionomers and membranes in contact with the anode oxygen evolution reaction (OER) catalyst. We report a new “passivated” anode architecture for AEMWE where the OER catalysts and ionomers are physically separated with a thin film amorphous oxide coating that is electrically insulating but conductive to hydroxide ions. We find that 2-3 nm of HfOx passivation layers show sufficient hydroxide ion transport to minimally limit the cell performance while suppressing ionomer degradation with both Ir (500 mA·cm-2 for 40 h) and CoOx (1.0 A·cm-2 for 100 h) model porous-transport-layer-supported catalysts in AEMWE. This interfacial engineering approach guides electrode design to improve the durability of AEMWE, particularly for systems operating with pure-water feed.

Electrocatalysts improve the efficiency of light-absorbing semiconductor photoanodes driving the oxygen evolution reaction, but the precise function(s) of the electrocatalysts remains unclear. We directly measure, for the first time, the interface carrier transport properties of a prototypical visible-light-absorbing semiconductor, α-Fe2O3, in contact with one of the fastest known water oxidation catalysts, Ni0.8Fe0.2O x , by directly measuring/controlling the current and/or voltage at the Ni0.8Fe0.2O x catalyst layer using a second working electrode. The measurements demonstrate that the majority of photogenerated holes in α-Fe2O3 directly transfer to the catalyst film over a wide range of conditions and that the Ni0.8Fe0.2O x is oxidized by photoholes to an operating potential sufficient to drive water oxidation at rates that match the photocurrent generated by the α-Fe2O3. The Ni0.8Fe0.2O x therefore acts as both a hole-collecting contact and a catalyst for the photoelectrochemical water oxidation process. Separate measurements show that the illuminated junction photovoltage across the α-Fe2O3|Ni0.8Fe0.2O x interface is significantly decreased by the oxidation of Ni2+ to Ni3+ and the associated increase in the Ni0.8Fe0.2O x electrical conductivity. In sum, the results illustrate the underlying operative charge-transfer and photovoltage generation mechanisms of catalyzed photoelectrodes, thus guiding their continued improvement.