Large quantities of natural gas are emitted from the seafloor into the stratified coastal ocean near Coal Oil Point, Santa Barbara Channel, California. Methane was quantified in the down current surface water at 79 stations in a 280 km2 study area. The methane plume spread over an area of ∼70 km2 and emitted on the order of 5 × 104 mol d-1 to the atmosphere. A monthly time series at 14 stations showed variable methane concentrations which were correlated with changing sub-mesoscale surface currents. Air-sea fluxes estimated from the time series indicate that the air-sea flux derived for the 280 km2 area is representative of the daily mean flux from this area. Only 1% of the dissolved methane originating from Coal Oil Point enters the atmosphere within the study area. Most of it appears to be transported below the surface and oxidized by microbial activity. Copyright 2007 by the American Geophysical Union.

Detailed airborne, surface, and subsurface chemical measurements, primarily obtained in May and June 2010, are used to quantify initial hydrocarbon compositions along different transport pathways (i.e., in deep subsurface plumes, in the initial surface slick, and in the atmosphere) during the Deepwater Horizon oil spill. Atmospheric measurements are consistent with a limited area of surfacing oil, with implications for leaked hydrocarbon mass transport and oil drop size distributions. The chemical data further suggest relatively little variation in leaking hydrocarbon composition over time. Although readily soluble hydrocarbons made up ∼25% of the leaking mixture by mass, subsurface chemical data show these compounds made up ∼69% of the deep plume mass; only ∼31% of the deep plume mass was initially transported in the form of trapped oil droplets. Mass flows along individual transport pathways are also derived from atmospheric and subsurface chemical data. Subsurface hydrocarbon composition, dissolved oxygen, and dispersant data are used to assess release of hydrocarbons from the leaking well. We use the chemical measurements to estimate that (7.8 ± 1.9) × 10(6) kg of hydrocarbons leaked on June 10, 2010, directly accounting for roughly three-quarters of the total leaked mass on that day. The average environmental release rate of (10.1 ± 2.0) × 10(6) kg/d derived using atmospheric and subsurface chemical data agrees within uncertainties with the official average leak rate of (10.2 ± 1.0) × 10(6) kg/d derived using physical and optical methods.