Skip to main content
eScholarship
Open Access Publications from the University of California

Scholarly Works (130 results)

  • Article
  • Peer Reviewed
UC San Francisco Previously Published Works (2005)

Store-operated calcium entry depicts the movement of extracellular Ca2+ into cells through plasma membrane Ca2+ channels activated by depletion of intracellular Ca2+ stores. The members of the canonical subfamily of transient receptor potential channels (TRPC) have been implicated as the molecular bases for store-operated channels (SOC). Here we investigate the role of phospholipase C (PLC) in regulation of native SOC and the expression of endogenous TRPC in human epidermal keratinocytes. Calcium entry in response to store depletion with thapsigargin was reversibly blocked by 2-aminoethoxydiphenyl borane, an effective SOC inhibitor, and suppressed by the diacylglycerol analoge, 1-oleoyl-2-acetyl-sn-glycerol. Inhibition of PLC with U73122 or transfection of a PLCgamma1 antisense cDNA construct completely blocked SOC activity, indicating a requirement for PLC, especially PLCgamma1, in the activation of SOC. RT-PCR and immunoblotting analyses showed that TRPC1, TRPC3, TRPC4, TRPC5, and TRPC6 are expressed in keratinocytes. Knockdown of the level of endogenous TRPC1 or TRPC4 inhibited store-operated calcium entry, indicating they are part of the native SOC. Co-immunoprecipitation studies demonstrated that TRPC1, but not TRPC4, interacts with PLCgamma1 and the inositol 1,4,5-trisphosphate receptor (IP3R). The association of TRPC1 with PLCgamma1 and IP3R decreased in keratinocytes with higher intracellular Ca2+, coinciding with a downregulation in SOC activity. Our results indicate that the activation of SOC in keratinocytes depends, at least partly, on the interaction of TRPC with PLCgamma1 and IP3R.

    Cover page: Phospholipase C gamma 1 is required for activation of store-operated channels in human keratinocytes
    • Article
    • Peer Reviewed
    UC Irvine Previously Published Works (1999)
    The gas phase hydrogen peroxide and methylhydroperoxide concentrations were measured in the troposphere over the tropical Pacific Ocean as a component of NASA's Global Tropospheric Experiment/Pacific Exploratory Mission-Tropics A field campaign. Flights on two aircraft covered the Pacific from 70°S to 60°N and 110°E to 80°W and South Atlantic from 40°S to 15°N and 45°W to 70°E, and extending from 76 to 13,000 m altitude. H2O2 and CH3OOH have the highest concentrations at a given altitude at the equator and decrease with increasing latitude in both the northern and southern hemispheres. Above 4 km the gradient is substantially reduced for both H2O2 and CH3OOH with latitude, and at altitudes in excess of 8 km there is no latitudinal dependence. H2O2 and CH3OOH exhibit maximum mixing ratios between 1 and 2 km at all latitudes. The mean mixing ratio of H2O2 at the equator was 1600 ± 600 parts per trillion by volume (pptv) decreasing to 500 ± 250 pptv at latitudes greater than 55° north and south between 1 and 2 km altitude. CH3OOH at the equator was 1400 ± 250 pptv, decreasing to 330 ± 200 pptv at high latitudes at altitudes between 1 and 2 km. The concentration of peroxides at high latitudes in the northern hemisphere was generally a factor of 2 higher than at corresponding latitudes in the southern hemisphere. The ratio of H2O2 to CH3OOH was between 1 and 2 from 45°S to 35°N at altitudes below 4 km. Between 5° to 15°N the ratio is less than 1, due to preferential removal of H2O2 in the Intertropical Convergence Zone. Copyright 1999 by the American Geophysical Union.
      Cover page: Distribution of hydrogen peroxide and methylhydroperoxide over the Pacific and South Atlantic OceansCreative Commons 'BY' version 4.0 license
      • Article
      • Peer Reviewed
      UC San Diego Previously Published Works (2007)

      We have analyzed the linearity performance of analog fiber-optic links based on electroabsorption modulators (EAM) operating at high optical power. The negative feedback caused by photocurrent generation improves the modulator linearity in the gain saturation regime. In the absence of laser relative intensity noise (RIN), the link spur-free dynamic range (SFDR) increases with the power of four-thirds of the input optical power after gain saturation occurs. A multi-octave SFDR of more than 135 dB/Hz(2/3) has been found to be achievable with sufficiently high power. (c) 2007 Optical Society of America

        Cover page: Analysis of linearity of highly saturated electroabsorption modulator link due to photocurrent feedback effect
        • Article
        • Peer Reviewed
        UC San Francisco Previously Published Works (2014)
        Normal hearing requires exquisite cooperation between bony and sensorineural structures within the cochlea. For example, the inner ear secretes proteins such as osteoprotegrin (OPG) that can prevent cochlear bone remodeling. Accordingly, diseases that affe
          • Article
          • Peer Reviewed
          UC Irvine Previously Published Works (2009)
            Cover page: Chlorine activation indoors and outdoors via surface-mediated reactions of nitrogen oxides with hydrogen chloride (Proceedings of the National Academy of Sciences of the United States of America (2009) 106, 33, (13647-13654) DOI:10.1073/pnas.0904195106))
            • Article
            • Peer Reviewed
            LBL Publications (2019)
            The SeaQuest spectrometer at Fermilab was designed to detect oppositely-charged pairs of muons (dimuons) produced by interactions between a 120 GeV proton beam and liquid hydrogen, liquid deuterium and solid nuclear targets. The primary physics program uses the Drell–Yan process to probe antiquark distributions in the target nucleon. The spectrometer consists of a target system, two dipole magnets and four detector stations. The upstream magnet is a closed-aperture solid iron magnet which also serves as the beam dump, while the second magnet is an open aperture magnet. Each of the detector stations consists of scintillator hodoscopes and a high-resolution tracking device. The FPGA-based trigger compares the hodoscope signals to a set of pre-programmed roads to determine if the event contains oppositely-signed, high-mass muon pairs.
              Cover page: The SeaQuest spectrometer at Fermilab
              • Article
              • Peer Reviewed
              LBL Publications (2024)
              The Facility for Rare Isotope Beams (FRIB) began operation with 1 kW beam power for scientific users in May 2022 upon completion of 8 years of project construction. The ramp-up to the ultimate beam power of 400 kW, planned over a 6-year period, will enable the facility to reach its full potential for scientific discovery in isotope science and applications. In December 2023, a record-high beam power of 10.4 kW uranium was delivered to the target. Technological developments and accelerator improvements are being made over the entire facility and are key to completion of the power ramp-up. Major technological developments entail the phased deployment of high-power beam-intercepting systems, including the charge strippers, the charge selection systems, the production target, and the beam dump, along with support systems, including non-conventional utilities (NCU) and remote handling facilities. Major accelerator improvements include renovations to aging legacy systems associated with experimental beam lines and system automation for improved operational efficiency and better machine availability. Experience must be gained to safely handle the increased radiological impacts associated with high beam power; extensive machine studies and advanced beam tuning procedures are needed to minimize uncontrolled beam losses for the desired operating conditions. This paper discusses the technological developments and accelerator improvements with emphasis on major R&D efforts.
                Cover page: Technological developments and accelerator improvements for the FRIB beam power ramp-upCreative Commons 'BY' version 4.0 license
                • Article
                • Peer Reviewed
                LBL Publications (1998)
                The physics emphases of the PHENIX collaboration and the design and current status of the PHENIX detector are discussed. The plan of the collaboration for making the most effective use of the available luminosity in the first years of RHIC operation is also presented.
                  Cover page: The PHENIX experiment at RHIC
                  • Article
                  • Peer Reviewed
                  UCLA Previously Published Works (2022)
                  ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
                    Creative Commons 'BY-NC-ND' version 4.0 license
                    • Article
                    • Peer Reviewed
                    UCLA Previously Published Works (2022)
                    This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter.
                      Creative Commons 'BY-NC-ND' version 4.0 license
                      Top