Cooking is one of the most substantial sources of indoor air pollution in most residences. This is mitigated most often by exhaust devices located near cooking surfaces. In this study, we measured the efficacy of one type of kitchen ventilation device which has been studied very little: a range-integrated downdraft ventilator. This was done via a full-scale mock-up of such a device. Results show that, to a greater degree than other kitchen ventilation devices, pollutant removal performance is highly dependent on location and type of source. Back-burner results for shallow emitters gave over 90% capture efficiency at a flow rate of 150cfm, while front-burner capture efficiency for taller emitters was below 30% even at the greatest flows tested (500cfm). Sensitivity tests were done to help inform a test method for such devices in the future.

As homes become more air-tight in response to energy efficiency concerns and changes in building codes, new ventilation solutions are needed in order to provide for a healthy indoor environment while minisinz energy use. This is especially true in the state of California, whose 2019 Title 24 Standard encourages tight envelopes through prescriptive air sealing and performance requirements, and requires whole-house mechanical ventilation in all new homes. One such solution employs a real-time assessment of the indoor environment and dynamic operation of a ventilation system. In this study, we investigated the energy savings benefits and indoor air quality improvement available with such a "smart" control strategy for ventilation in four very different California climate spnes. We simulated annual operation of multiple control strategies on detailed models of two representative Title 24-comptiantprototype homes in California. We did this through co-ńmulation of the Energy Plus building energy software and CONTAM, an airflow and indoor air quality simulation software, and an automated Python-based parametric analysis of control variables. All simulations employed the assumption of a single well-mixed icone and the equivalent ventilation method outlined in ASHRAE Standard 62.2-2016. Results show several interesting trends which we hope will help inform standards-development teams, home builders, consumers, and smart ventilation equipment manufacturers in their approach to dealing with dynamically controlled ventilation. Ingenerai, control strategies which included option based on sensing of outdoor air temperature vastly outperformed strategies which did not. Among these, a temperature cutoff strategy performed nearly as well as more complex variable airflow and variable-exposure-target strategies. Control strategies based solely on occupancy were among the worst performing. Other issues require more investigation such as the acceptability of a seasonal shifting strategy over a daily shifting strategy, and the use of a maximum exposure limit. This work serves as the foundation for ongoing work on multi-cone control and control based on individual pollutant measurements.

Identifying human genes relevant for the processing of pain requires difficult-to-conduct and expensive large-scale clinical trials. Here, we examine a novel integrative paradigm for data-driven discovery of pain gene candidates, taking advantage of the va