This is a Review of recent studies on surface structures of crystalline materials in the presence of gases in the mTorr to atmospheric pressure range, which brings surface science into a brand new direction. Surface structure is not only a property of the material but also depends on the environment surrounding it. This Review emphasizes that high/ambient pressure goes hand-in-hand with ambient temperature, because weakly interacting species can be densely covering surfaces at room temperature only when in equilibrium with a sufficiently high gas pressure. At the same time, ambient temperatures help overcome activation barriers that impede diffusion and reactions. Even species with weak binding energy can have residence lifetimes on the surface that allow them to trigger reconstructions of the atomic structure. The consequences of this are far from trivial because under ambient conditions the structure of the surface dynamically adapts to its environment and as a result completely new structures are often formed. This new era of surface science emerged and spread rapidly after the retooling of characterization techniques that happened in the last two decades. This Review is focused on the new surface structures enabled particularly by one of the new tools: high-pressure scanning tunneling microscopy. We will cover several important surfaces that have been intensely scrutinized, including transition metals, oxides, and alloys.

Scanning tunneling microscopy (STM) has proved to be a prime tool to characterize the atomic structure of crystal surfaces under UHV conditions. With the development of high-pressure scanning tunneling microscopy (HP-STM), the scope of this technique has been largely extended, as new structures were found to occur under gas phase chemical potentials achieved under ambient conditions. Particularly interesting is the substantial restructuring of initially flat and stable surfaces into new orientations by formation of nanoclusters. Here we discuss the possible generality of this phenomenon by analyzing cases where atomically flat surfaces of certain transition metals undergo such changes in the presence of CO at room temperature (RT) while some remain unchanged. From our analysis we argue that such changes can be predicted from thermodynamic data published in the literature, particularly from the difference in adsorption energy on low-and high-coordination sites, like terrace and step sites, which can be obtained from thermal desorption spectroscopy (TDS) measurements, and possibly also from theoretical calculations. For the vicinal surfaces with high Miller indices, changes in the repulsive elastic interactions between the ordered steps due to adsorbates may also play an important role.

Ambient-pressure X-ray photoelectron spectroscopy (XPS) was used to investigate the reactions of CO, H2, and their mixtures on Co foils. We found that CO adsorbs molecularly on the clean Co surface and desorbs intact in vacuum with increasing rate until ∼90°C where all CO desorbs in seconds. In equilibrium with 100 mTorr gas, CO dissociates above 120°C, leaving carbide species on the surface but no oxides, because CO efficiently reduces the oxides at temperatures ∼100°C lower than H2. Water as impurities or produced by reaction of CO and H2 efficiently oxidizes Co even at room temperature. Under 97:3 CO/H2 mixture and with increasing temperatures, the Co surface becomes more oxidized and covered by hydroxyl groups until ∼150°C where surface starts to get reduced, accompanied by carbide accumulation indicative of CO dissociation. A similar trend was observed for 9:1 and 1:1 mixtures, but surface reduction begins at higher temperatures. (Figure Presented).

Atmospheric pressure X-ray photoelectron spectroscopy (XPS) is demonstrated using single-layer graphene membranes as photoelectron-transparent barriers that sustain pressure differences in excess of 6 orders of magnitude. The graphene serves as a support for catalyst nanoparticles under atmospheric pressure reaction conditions (up to 1.5 bar), where XPS allows the oxidation state of Cu nanoparticles and gas phase species to be simultaneously probed. We thereby observe that the Cu(2+) oxidation state is stable in O2 (1 bar) but is spontaneously reduced under vacuum. We further demonstrate the detection of various gas-phase species (Ar, CO, CO2, N2, O2) in the pressure range 10-1500 mbar including species with low photoionization cross sections (He, H2). Pressure-dependent changes in the apparent binding energies of gas-phase species are observed, attributable to changes in work function of the metal-coated grids supporting the graphene. We expect atmospheric pressure XPS based on this graphene membrane approach to be a valuable tool for studying nanoparticle catalysis.

The supramolecular self-assembly of copper(II) octaethylporphyrin (CuOEP) and octaethylporphyrin (H2OEP) on graphitic surfaces immersed in organic solvents (dichlorobenzene, dodecane) is studied using scanning tunneling microscopy (STM) and Raman spectroscopy. STM reveals that the self-assembled structure of CuOEP in 1,2-dichlorobenzene is significantly altered by dissolved oxygen within the solvent. Raman spectroscopy reveals that the presence of the oxygen alters the molecule-substrate interaction, which is attributed to the adsorption of oxygen on the Cu center of the CuOEP, which is facilitated by electron transfer from the graphitic surface. Such oxygen-induced changes are not observed for H2OEP, indicating that the metal center of CuOEP plays a critical role. When the solvent is dodecane, we find that solvation effects dominate. CuOEP adsorbed on graphitic surfaces provides a model system relevant to the study of the transport and activation of oxygen by enzymes and other complexes.

Understanding interactions at the interfaces of carbon with ionic liquids (ILs) is crucially beneficial for the diagnostics and performance improvement of electrochemical devices containing carbon as active materials or conductive additives in electrodes and ILs as solvents or additives in electrolytes. The interfacial interactions of three typical imidazolium-based ILs, 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide (AMImTFSI) ILs having ethyl (C2), butyl (C4) and octyl (C8) chains in their cations, with highly oriented pyrolytic graphite (HOPG) were studied in-situ by electrochemical scanning tunneling microscopy (EC-STM). The etching of HOPG surface and the exfoliation of graphite/graphene flakes as well as cation intercalation were observed at the HOPG/C2MImTFSI interface. The etching also takes place in C4MImTFSI at −1.5 V vs Pt but only at step edges with a much slower rate, whereas C8MIm+ cations adsorbs strongly on the HOPG surface under similar conditions with no observable etching or intercalation. The EC-STM observations can be explained by the increase in van der Waals interaction between the cations and the graphite surface with increasing length of alkyl chains.

We studied the structure of the copper-cobalt (CuCo) surface alloy, formed by Co deposition on Cu(110), in dynamic equilibrium with CO. Using scanning tunneling microscopy (STM), we found that, in vacuum at room temperature and at low Co coverage, clusters of a few Co atoms substituting Cu atoms form at the surface. At CO pressures in the Torr range, we found that up to 2.5 CO molecules can bind on a single Co atom, in carbonyl-like configurations. Based on high-resolution STM images, together with density functional theory calculations, we determined the most stable CuCo cluster structures formed with bound CO. Such carbonyl-like formation manifests in shifts in the binding energy of the Co core-level peaks in X-ray photoelectron spectra, as well as shifts in the vibrational modes of adsorbed CO in infrared reflection absorption spectra. The multiple CO adsorption on a Co site weakens the Co-CO bond and thus reduces the C-O bond scission probability. Our results may explain the different product distribution, including higher selectivity toward alcohol formation, when bimetallic CuCo catalysts are used compared to pure Co.

This study investigates the oxidation state of ceria thin films' surface and subsurface under 100 mTorr hydrogen using ambient pressure X-ray photoelectron spectroscopy. We examine the influence of the initial oxidation state and sample temperature (25-450 °C) on the interaction with hydrogen. Our findings reveal that the oxidation state during hydrogen interaction involves a complex interplay between oxidizing hydride formation, reducing thermal reduction, and reducing formation of hydroxyls followed by water desorption. In all studied conditions, the subsurface exhibits a higher degree of oxidation compared to the surface, with a more subtle difference for the reduced sample. The reduced samples are significantly hydroxylated and covered with molecular water at 25 °C. We also investigate the impact of water vapor impurities in hydrogen. We find that although 1 × 10^-6 Torr water vapor oxidizes ceria, it is probably not the primary driver behind the oxidation of reduced ceria in the presence of hydrogen.

Bimetallic and multi-component catalysts typically exhibit composition-dependent activity and selectivity, and when optimized often outperform single-component catalysts. Here we used ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and in situ and ex situ transmission electron microscopy (TEM) to elucidate the origin of composition dependence observed in the catalytic activities of monodisperse CoPd bimetallic nanocatalysts for CO oxidation. We found that the catalysis process induced a reconstruction of the catalysts, leaving CoOx on the nanoparticle surface. The synergy between Pd and CoOx coexisting on the surface promotes the catalytic activity of the bimetallic catalysts. This synergistic effect can be optimized by tuning the Co/Pd ratios in the nanoparticle synthesis, and it reaches a maximum at compositions near Co0.24Pd0.76, which achieves complete CO conversion at the lowest temperature. Our combined AP-XPS and TEM studies provide direct observation of the surface evolution of the bimetallic nanoparticles under catalytic conditions and show how this evolution correlates with catalytic properties.

The (111) surface of copper (Cu), its most compact and lowest energy surface, became unstable when exposed to carbon monoxide (CO) gas. Scanning tunneling microscopy revealed that at room temperature in the pressure range 0.1 to 100 Torr, the surface decomposed into clusters decorated by CO molecules attached to edge atoms. Between 0.2 and a few Torr CO, the clusters became mobile in the scale of minutes. Density functional theory showed that the energy gain from CO binding to low-coordinated Cu atoms and the weakening of binding of Cu to neighboring atoms help drive this process. Particularly for softer metals, the optimal balance of these two effects occurs near reaction conditions. Cluster formation activated the surface for water dissociation, an important step in the water-gas shift reaction.