Skip to main content
eScholarship
Open Access Publications from the University of California

Scholarly Works (6 results)

  • Article
  • Peer Reviewed
LBL Publications (2004)
    Cover page: A step towards a computing grid for the LHC experiments: ATLAS Data Challenge 1
    • Article
    • Peer Reviewed
    UC Davis Previously Published Works (2009)
      Cover page: The ATLAS CollaborationCreative Commons 'BY' version 4.0 license
      • Article
      • Peer Reviewed
      UC Davis Previously Published Works (2010)
      The ATLAS Inner Detector is a composite tracking system consisting of silicon pixels, silicon strips and straw tubes in a 2 T magnetic field. Its installation was completed in August 2008 and the detector took part in data-taking with single LHC beams and cosmic rays. The initial detector operation, hardware commissioning and in-situ calibrations are described. Tracking performance has been measured with 7. 6 million cosmic-ray events, collected using a tracking trigger and reconstructed with modular pattern-recognition and fitting software. The intrinsic hit efficiency and tracking trigger efficiencies are close to 100%. Lorentz angle measurements for both electrons and holes, specific energy-loss calibration and transition radiation turn-on measurements have been performed. Different alignment techniques have been used to reconstruct the detector geometry. After the initial alignment, a transverse impact parameter resolution of 22. 1±0. 9 μm and a relative momentum resolution σp/p=(4. 83±0. 16)×10-4 GeV-1×pT have been measured for high momentum tracks. © 2010 CERN for the benefit of the ATLAS collaboration.
        Cover page: The ATLAS Inner Detector commissioning and calibrationCreative Commons 'BY' version 4.0 license
        • Article
        • Peer Reviewed
        UC Davis Previously Published Works (2010)
        The ATLAS detector at the Large Hadron Collider has collected several hundred million cosmic ray events during 2008 and 2009. These data were used to commission the Muon Spectrometer and to study the performance of the trigger and tracking chambers, their alignment, the detector control system, the data acquisition and the analysis programs. We present the performance in the relevant parameters that determine the quality of the muon measurement. We discuss the single element efficiency, resolution and noise rates, the calibration method of the detector response and of the alignment system, the track reconstruction efficiency and the momentum measurement. The results show that the detector is close to the design performance and that the Muon Spectrometer is ready to detect muons produced in high energy proton-proton collisions. © 2010 CERN for the benefit of the ATLAS collaboration.
          Cover page: Commissioning of the ATLAS Muon Spectrometer with cosmic raysCreative Commons 'BY' version 4.0 license
          • Article
          • Peer Reviewed
          UC Davis Previously Published Works (2010)
          The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%. © 2010 CERN for the benefit of the ATLAS collaboration.
            Cover page: Readiness of the ATLAS Tile Calorimeter for LHC collisionsCreative Commons 'BY' version 4.0 license
            • Article
            • Peer Reviewed
            UC Davis Previously Published Works (2011)
            Muons from cosmic-ray interactions in the atmosphere provide a high-statistics source of particles that can be used to study the performance and calibration of the ATLAS detector. Cosmic-ray muons can penetrate to the cavern and deposit energy in all detector subsystems. Such events have played an important role in the commissioning of the detector since the start of the installation phase in 2005 and were particularly important for understanding the detector performance in the time prior to the arrival of the first LHC beams. Global cosmic-ray runs were undertaken in both 2008 and 2009 and these data have been used through to the early phases of collision data-taking as a tool for calibration, alignment and detector monitoring. These large datasets have also been used for detector performance studies, including investigations that rely on the combined performance of different subsystems. This paper presents the results of performance studies related to combined tracking, lepton identification and the reconstruction of jets and missing transverse energy. Results are compared to expectations based on a cosmic-ray event generator and a full simulation of the detector response.
              Cover page: Studies of the performance of the ATLAS detector using cosmic-ray muonsCreative Commons 'BY' version 4.0 license
              Top