Near-infrared (NIR) luminescent lanthanide complexes hold great promise for practical applications, as their optical properties have several complementary advantages over organic fluorophores and semiconductor nanoparticles. The fundamental challenge for lanthanide luminescence is their sensitization through suitable chromophores. The use of the metallacrown (MC) motif is an innovative strategy to arrange several organic sensitizers at a well-controlled distance from a lanthanide cation. Herein we report a series of lanthanide “encapsulated sandwich” MC complexes of the form Ln3+ [12-MC(Zn(II),quinHA)-4]2[24-MC(Zn(II),quinHA)-8] (Ln3+ [Zn(II)MC(quinHA)]) in which the MC framework is formed by the self-assembly of Zn2+ ions and tetradentate chromophoric ligands based on quinaldichydroxamic acid (quinHA). A first-generation of luminescent MCs was presented previously but was limited due to excitation wavelengths in the UV. We report here that through the design of the chromophore of the MC assembly, we have significantly shifted the absorption wavelength toward lower energy (450 nm). In addition to this near-visible inter- and/or intraligand charge transfer absorption, Ln3+ [Zn(II)MC(quinHA)] exhibits remarkably high quantum yields, long luminescence lifetimes (CD3OD; Yb3+, QLn(L) = 2.88(2)%, τobs = 150.7(2) μs; Nd3+, QLn(L) = 1.35(1)%, τobs = 4.11(3) μs; Er3+, QLn(L) = 3.60(6)·10–2%, τobs = 11.40(3) μs), and excellent photostability. Quantum yields of Nd3+ and Er3+ MCs in the solid state and in deuterated solvents, upon excitation at low energy, are the highest values among NIR-emitting lanthanide complexes containing C–H bonds. The versatility of the MC strategy allows modifications in the excitation wavelength and absorptivity through the appropriate design of the ligand sensitizer, providing a highly efficient platform with tunable properties.

Polyanion dispersants stabilize aqueous dispersions of hydrophilic (native) inorganic oxide particles, including pigments currently used in paints, which are used at an annual scale of 3 million metric tons. While obtaining stable aqueous dispersions of hydrophobically modified particles has been desired for the promise of improved film performance and water barrier properties, it has until now required either prohibitively complex polyanions, which represent a departure from conventional dispersants, or multistep syntheses based on hybrid-material constructs. Here, we demonstrate the aqueous dispersion of alkylsilane-capped inorganic oxide pigments with conventional polycarboxylate dispersants, such as carboxymethylcellulose (CMC) and polyacrylate, as well as a commercial anionic copolymer. Contact-angle measurements demonstrate that the hydrophobically modified pigments retain significant hydrophobic character even after adsorbing polyanion dispersants. CMC adsorption isotherms demonstrate 92% greater polyanion loading on trimethylsilyl modified hydrophobic particles relative to native oxide at pH 8. However, consistent with prior literature, hydrophobically modified silica particles adsorb polyanions very weakly under these conditions. These data suggest that Lewis acidic heteroatoms such as Al(3+) sites on the pigment surface are necessary for polyanion adsorption. The adsorbed polyanions increase the dispersion stability and zeta potential of the particles. Based on particle sedimentation under centrifugal force, the hydrophobically modified pigments possess greater dispersion stability with polyanions than the corresponding native hydroxylated particles. The polyanions also assist in the aqueous wetting of the hydrophobic particles, facilitating the transition from a dry powder into an aqueous dispersion of primary particles using less agitation than the native hydroxylated pigment. The application of aqueous dispersions of hydrophobically modified oxide particles to waterborne coatings leads to films that display lower water uptake at high relative humidities and greater hydrophilic stain resistances. This improved film performance with hydrophobically modified pigments is the result of better association between latex polymer and pigment in the dry film.

Building on the recent demonstration of aqueous-dispersible hydrophobic pigments that retain their surface hydrophobicity even after drying, we demonstrate the synthesis of surface-modified Ti-Pure R-706 (denoted R706) titanium dioxide-based pigments, consisting of a thin (one to three monolayers) grafted polymethylhydrosiloxane (PMHS) coating, which (i) are hydrophobic in the dry state according to capillary rise and dynamic vapor sorption measurements and (ii) form stable aqueous dispersions at solid contents exceeding 75 wt % (43 vol %), without added dispersant, displaying similar rheology to R706 native oxide pigments at 70 wt % (37 vol %) consisting of an optimal amount of conventional polyanionic dispersant (0.3 wt % on pigment basis). The surface-modified pigments have been characterized via ²⁹Si and ¹³C cross-polarization/magic angle spinning solid-state NMR spectroscopy; infrared spectroscopy; thermogravimetric and elemental analyses; and ζ potential measurements. On the basis of these data, the stability of the surface-modified PMHS-R706 aqueous dispersions is attributed to steric effects, as a result of grafted PMHS strands on the R706 surface, and depends on the chaotropic nature of the base used during PMHS condensation to the pigment/polysiloxane interface. The lack of water wettability of the surface-modified oxide particles in their dry state translates to improved water-barrier properties in coatings produced with these surface-modified pigment particles. The synthetic approach appears general as demonstrated by its application to various inorganic-oxide pigment particles.