Tetrabromobisphenol A (TBBPA) is a flame retardant and has become a widely concerning environmental pollutant. An ultrasensitive nanobody-based immunoassay was developed to monitor the exposure of TBBPA in sediment. First, the anti-TBBPA nanobody was fused with nanoluciferase, and then a one-step bioluminescent enzyme immunoassay (BLEIA) was developed with high sensitivity for TBBPA, with a maximum half inhibition concentration (IC₅₀) at 187 pg/mL. Although approximately 10-fold higher sensitivity can be achieved by this developed BLEIA than by the classical two-step ELISA (IC₅₀ at 1778 pg/mL), it is still a challenge to detect trace TBBPA in sediment samples reliably due to the relatively high matrix effect. To further improve the performance of this one-step BLEIA, a C4b-binding protein (C4BP) was inserted as a self-assembling linker between the nanobody and nanoluciferase. Therefore, a heptamer fusion containing seven binders and seven tracers was generated. This reagent improved the binding capacity and signal amplification. The one-step heptamer plus BLEIA based on this immune-reagent shows an additional 7-fold improvement of sensitivity, with the IC₅₀ of 28.9 pg/mL and the limit of detection as low as 2.5 pg/mL. The proposed assay was further applied to determine the trace TBBPA in sediment, and the recovery was within 92-103%. Taking advantage of this heptamer fusion, one-step BLEIA can serve as a powerful tool for fast detection of trace TBBPA in the sediment samples.

Sodium saccharin is a common artificial sweetener. However, due to its possible carcinogenic effects and causing metabolic disorders, many countries have strictly regulated its use in food. In the study, we prepared a specific monoclonal antibody (mAb 2H11) using the new hapten (6-carboxylsaccharin) and developed a direct competitive enzyme-linked immunosorbent assay (dcELISA) for the screening of sodium saccharin residue in food. The half-maximum inhibition concentration (IC₅₀ ) and working range (IC₂₀ -IC₈₀ , the concentrations causing 20% and 80% inhibition by sodium saccharin) were 32.5 and 6.47 to 164 ng/mL, which was 6.5 times more sensitive than the previously reported immunoassay. The average recoveries of sodium saccharin in spiked food samples detected by dcELISA ranged from 82.1% to 117%. Among 70 food samples bought in the physical stores and online, sodium saccharin residues were only detected in four samples purchased online (one canned pineapple, two winter jujube, and one kimchi). The content measured by dcELISA agreed well with those determined by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The developed dcELISA was proved to be a sensitive and accurate method for determining sodium saccharin in food. PRACTICAL APPLICATION: Quantitation of sodium saccharin residue in food is very necessary and important for consumers and regulatory agencies.

Dicamba herbicide is increasingly used in the world, in particular' with the widespread cultivation of genetically modified dicamba-resistant crops. However, the drift problem in the field has caused phytotoxicity against naive, sensitive crops, raising legal concerns. Thus, it is particularly timely to develop a method that can be used for on-the-spot rapid detection of dicamba in the field. In this paper, a lateral flow immunochromatographic strip (LFIC) was developed. The quantitative detection can be conducted by an app on a smartphone, named "Color Snap." The tool reported here provides results in 10 min and can detect dicamba in water with a LOD (detection limit) value of 0.1 mg/L. The developed LFIC shows excellent stability and sensitivity appropriate for field analysis. Our sensor is portable and excellent tool for on-site detection with smartphone imaging for better accuracy and precision of the results. Graphical abstract.

3-Phenoxybenzoic acid (3-PBA) is a human urinary metabolite of many pyrethroid insecticides and can be used as a biomarker to monitor human exposure to these pesticides. A rapid and sensitive direct competitive fluorescence enzyme immunoassay (dc-FEIA) for detecting 3-PBA on the basis of a nanobody (Nb)-alkaline phosphatase (AP) fusion protein was developed. The anti-3-PBA Nb-AP fusion protein was expressed and purified. The 50% inhibitory concentration (IC₅₀) and linear range of dc-FEIA were 0.082 and 0.015-0.447 ng/mL, respectively, with a detection limit of 0.011 ng/mL. The IC₅₀ of dc-FEIA was improved by nearly ten times compared with those of one-step and three-step direct competitive enzyme-linked immunosorbent assay (dc-ELISA). Spiked urine samples were detected by both dc-FEIA and liquid chromatography-mass spectrometry (LC-MS), and the results showed good consistency between the two analysis methods, indicating the reliability of dc-FEIA based on the Nb-AP fusion protein for detecting 3-PBA in urine.

To determine malachite green (MG) and its major metabolite, leucomalachite green (LMG) residual levels in tilapia fish, chemiluminescent enzyme immunoassay (CLEIA) was developed based on a single-chain variable fragment (scFv)-alkaline phosphatase (AP) fusion protein. At first, V_H and V_L gene sequences were cloned from hybridoma cell lines secreting monoclonal antibody against LMG, and then thoroughly by database-assisted sequence analysis. Finally, the productive V_H and V_L were assembled to an intact scFv sequence and engineered to produce scFv-AP fusion protein. The fusion protein was further identified as a bifunctional reagent for immunoassay, then a sensitive one-step CLEIA against LMG was developed with a half-maximal inhibitory concentration (IC₅₀) and limit of detection (LOD) of 1.3 and 0.04 ng/mL, respectively. The validation results of this novel competitive CLEIA was in line with those obtained by classical HPLC method for determination of total MG in spiked and field incurred samples.

Phage-borne peptides and antibody fragments isolated from phage display libraries have proven to be versatile and valuable reagents for immunoassay development. Due to the lack of convenient and mild-condition methods for the labeling of the phage particles, isolated peptide/protein affinity ligands are commonly removed from the viral particles and conjugated to protein tracers or nanoparticles for analytical use. This abolishes the advantage of isolating ready-to-use affinity binders and creates the risk of affecting the polypeptide activity. To circumvent this problem, we optimized the phage display system to produce phage particles that express the affinity binder on pIII and a polyglycine short peptide fused to pVIII that allows the covalent attachment of tracer molecules employing sortase A. Using a llama heavy chain only variable domain (VHH) against the herbicide 2,4-D on pIII as the model, we showed that the phage can be extensively decorated with a rhodamine-LPETGG peptide conjugate or the protein nanoluciferase (Nluc) equipped with a C-terminal LPETGG peptide. The maximum labeling amounts of rhodamine-LPETGG and Nluc-LPETGG were 1238 ± 63 and 102 ± 16 per phage, respectively. The Nluc-labeled dual display phage was employed to develop a phage bioluminescent immunoassay (P-BLEIA) for the detection of 2,4-D. The limit of detection and 50% inhibition concentration of P-BLEIA were 0.491 and 2.15 ng mL^-1, respectively, which represent 16-fold and 8-fold improvement compared to the phage enzyme-linked immunosorbent assay. In addition, the P-BLEIA showed good accuracy for the detection of 2,4-D in spiked samples.

2,4-Dichlorophenoxyacetic acid (2,4-D) is a systemic conductive herbicide widely used across the world. With the large-scale and continuous use of 2,4-D, its possible harm to the environment and non-target organisms has attracted increasing attention, and the construction of a stable rapid on-site detection method is particularly important. In order to achieve on-site rapid detection of 2,4-D, we developed a gold nanoparticle immunochromatographic strip method with the visual elimination value was 50 ng/mL, and a quantitative detection limit of 11 ng/mL based on a nanobody. By combing with the color snap, the immunochromatographic strip could quantitatively analyze the amounts of 2,4-D. Meanwhile, a colorimetric card based on the true color of the test strips was developed for the qualitative analysis of 2,4-D on-site. The samples (water, fruits and vegetables) with and without 2,4-D were detected by the immunochromatographic strips, and the results showed the accuracy and reliability. Thus, this assay is a rapid and simple on-site analytical tool to detect and quantify 2,4-D levels in environmental samples, and the analytical results can be obtained in about ten minutes. In addition, the nanobody technology used in this study provides an inexhaustible supply of a relatively stable antibodies that can be archived as a nanobody, plasmid or even its sequence.

Although dicamba has long been one of the most widely used selective herbicides, some U.S. states have banned the sale and use of dicamba because of farmers complaints of drift and damage to nonresistant crops. To prevent illegal use of dicamba and allow monitoring of nonresistant crops, a rapid and sensitive method for detection of dicamba is critical. In this paper, three novel dicamba haptens with an aldehyde group were synthesized, conjugated to the carrier protein via a reductive-amination procedure and an indirect competitive chemiluminescent enzyme immunoassay (CLEIA) for dicamba was developed. The assay showed an IC₅₀ of 0.874 ng/mL which was over 15 times lower than that of the conventional enzyme immunoassay. The immunoassay was used to quantify dicamba concentrations in field samples of soil and soybean obtained from fields sprayed with dicamba. The developed CLEIA showed an excellent correlation with LC-MS analysis in spike-and-recovery studies, as well as in real samples. The recovery of dicamba ranged from 86 to 108% in plant samples and from 105 to 107% in soil samples. Thus, this assay is a rapid and simple analytical tool for detecting and quantifying dicamba levels in environmental samples and potentially a great tool for on-site crop and field monitoring.

Nanoluciferase (Nluc), the smallest luciferase known, was used as the fusion partner with a nanobody against aflatoxin B₁ to develop a bioluminescent enzyme immunoassay (BLEIA) for detection of the aflatoxin B₁ in cereal. Nanobody (clone G8) against aflatoxin B₁ was fused with nanoluciferase and cloned into a pET22b expression vector, and then transformed into Escherichia coli. The nanobody fusion gene contained a hexahistidine tag for purification by immobilized metal affinity chromatography, yielding a biologically active fusion protein. The fusion protein G8-Nluc retained binding properties of the original nanobody. Concentration of the coelenterazine substrate and buffer composition were also optimized to provide high intensity and long half-life of the luminescent signal. The G8-Nluc was used as a detection antibody to establish a competitive bioluminescent ELISA for the detection of aflatoxin B₁ in cereals successfully. Compared to classical ELISA, this novel assay showed more than 20-fold improvement in detection sensitivity, with an IC₅₀ value of 0.41 ng/mL and linear range from 0.10 to 1.64 ng/mL. In addition, the entire BLEIA detection procedure can be completed in one step within 2 h, from sample preparation to data analysis. These results suggest that nanobody fragments fused with nanoluciferase might serve as useful and highly sensitive dual functional reagents for the development of rapid and highly sensitive immunoanalytical methods.

Glypican-3 (GPC3) is a serological biomarker for the diagnosis of Hepatocellular carcinoma (HCC), but it is a challenging task to develop a bioassay for determination of the trace GPC3 in serum. In this study, Bioluminescense immunoassay based on bifunctional nanobody-nanoluciferase fusion was developed with the ultra-sensitive feature to achieve this goal. First, nanobodies special against GPC-3 binder as biological recognition element were generated by immunization and phage display technology. Second, The best clone GPN2 was fused with nanoluciferase as a dual-functional immunoreagent to establish an ultra-sensitive bioluminescence enzyme immunoassay (BLEIA), which is 30 and 5 times more sensitive than the traditional colorimetric assay and fluorescent assay, respectively. The cross-reactivity analysis of BLEIA showed that there was no cross-reactivity with HCC related tumor markers AFP, CEA, CA19-9 and GPC1/GPC2. The limit of detection (LOD) of developed BLEIA was 1.5 ng/mL, which assured its application in the diagnosis of GPC3 in 94 serum samples. This study indicates that BLEIA based on nanobody-nanoluciferase fusion could be used as a useful tool for the diagnosis of HCC patients.