Background: In total knee arthroplasty (TKA), inserts can have different levels of medial and lateral congruency determined by the acuteness of the upslopes of the anterior and posterior articular surfaces. The present study evaluated an insert with different levels of lateral congruency and a medial ball-in-socket congruency to test the hypothesis that a lateral flat (F) insert maximizes external tibial orientation at extension and internal orientation at 90° flexion and lowers the incidence of anterior lift-off relative to low-congruent (LC) and ultracongruent (UC) lateral inserts. Methods: Two surgeons treated 23 patients with unrestricted caliper-verified kinematic alignment (KA) and posterior cruciate ligament (PCL) retention. They randomly trialed inserts with a medial radial dial that functioned as a built-in goniometer by measuring the tibial orientation relative to a sagittal line on the femoral trial component. Anterior lift-off of the insert from the baseplate indicated PCL tightness. Results: The F insert’s mean of 9° of external tibial orientation was higher than that of the LC (5°, p < 0.0001) and UC inserts (2°, p < 0.0001). The −13° of internal tibial orientation at 90° flexion was higher than that of the LC (−9°, p < 0.0001) and UC inserts (−7°, p < 0.0001). The 0% incidence of anterior lift-off was less than that of the LC (26%) and UC inserts (57%) (p < 0.0001). Conclusions: Surgeons and implant manufacturers should know that adding congruency to the lateral articular surface limits external tibial orientation in extension and internal tibial orientation at 90° flexion and overtightens the PCL. These rotational limitations and flexion space tightness can adversely affect patellofemoral tracking and knee flexion.

Purpose

Excision of the posterior cruciate ligament (PCL) is recommended when implanting a medial pivot (MP) total knee arthroplasty (TKA) to reduce the risk of limiting flexion by over-tensioning the flexion space. The present study determined whether PCL retention (1) limits internal tibial rotation and (2) causes anterior lift-off of the insert in 90° flexion after implantation of an MP design with unrestricted caliper verified kinematic alignment (KA).

Methods

Four surgeons implanted an MP TKA design with medial ball-in-socket and lateral flat tibial insert in ten fresh-frozen cadaveric knees. Before and after PCL excision, trial inserts with medial goniometric markings measured the angular I-E tibial orientation relative to the trial femoral component's medial condyle in extension and at 90° flexion, and the surgeon recorded the occurrence of anterior lift-off of the insert at 90° flexion.

Results

PCL retention resulted in greater internal tibial rotation than PCL excision, with mean values of 15° vs 7° degrees from maximum extension to 90° flexion, respectively (p < 0.0007). At 90° flexion, no TKAs with PCL retention and one TKA with PCL excision had anterior lift-off of the insert (N.S.).

Conclusions

This preliminary study of ten cadaveric knees showed that PCL retention restored more passive internal tibial rotation than PCL excision with a negligible risk of anterior lift-off. However, in vivo analysis from multiple authors with a larger sample size is required to recommend PCL retention with an MP TKA design implanted with unrestricted caliper verified KA.

Purpose

Surgeons performing total knee arthroplasty (TKA) are interested in the accuracy and time it takes to make the four femoral resections that determine the setting of the femoral component. A method for quantifying the error of each resection is the thickness, measured by a caliper, minus the femoral target. The present study tested the hypothesis that the mean deviation of the resection from the femoral target, the percentage of resections with a deviation of ± 0.5, 1.0, 1.5, and 2.0 mm, and the time to complete the femoral cuts were not different between experienced (E) and less-experienced (LE) surgeons performing unrestricted caliper verified kinematically aligned (KA) TKA with manual instruments.

Methods

This study analyzed intraoperative verification worksheets from 203 patients treated by ten E surgeons and 58 patients treated by four LE surgeons. The worksheet recorded (1) the thickness of the femoral target for the distal medial (DM), distal lateral (DL), posterior medial (PM), and posterior lateral (PL) resections and the caliper thickness of the resections with a resolution of 0.5 mm, and (2) the time to complete them. The most accurate resection has a mean difference ± standard deviation of 0 ± 0.0 mm.

Results

The accuracy of the 1044 initial resections (261 patients) was significantly closer to the femoral target for E vs. the LE surgeons: 0.0 ± 0.4 vs. - 0.3 ± 0.5 for the DM, 0.0 ± 0.5 vs. - 0.4 ± 0.6 for the DL, - 0.1 ± 0.5 vs. - 0.2 ± 0.5 PM, and - 0.1 ± 0.5 vs. - 0.4 ± 0.6 for the PL resections (p ≤ 0.0248). E surgeons completed the femoral resections in 12 min; 5 min faster than LE surgeons (p < 0.0001).

Conclusions

Because the mean difference in femoral resections with manual instruments for E vs. LE surgeons was < 0.5 mm which is within the caliper's resolution, differences in accuracy were not clinically relevant. Surgeons exploring other alignment options and robotic, navigation, and patient-specific instrumentation might find these values helpful when deciding to change.

Level of evidence

III; case-control study.

Manipulation under anesthesia (MUA) for stiffness within 6 to 12 weeks after mechanically aligned total knee arthroplasty (TKA) generally yields better outcome scores than an MUA performed later. However, the timing of MUA after unrestricted, caliper-verified, kinematically aligned (KA) TKA remains uncertain. A retrospective review identified 82 of 3558 (2.3%) KA TKA patients treated with an MUA between 2010 and 2017. Thirty patients treated with an MUA within 3 months of the TKA (i.e., early) and 24 in the late group (i.e., >3 months) returned a questionnaire after a mean of 6 years and 5 years, respectively. Mean outcome scores for the early vs. late group were 78 vs. 62 for the Forgotten Joint Score (FJS) (p = 0.023) and 42 vs. 39 for the Oxford Knee Score (OKS) (p = 0.037). Subjectively, the early vs. late group responses indicated that 83% vs. 67% walked without a limp, 73% vs. 54% had normal extension, and 43% vs. 25% had normal flexion. An MUA within 3 months after unrestricted KA TKA provided excellent FJS and OKS at final follow-up relative to a late MUA. A late MUA performed after 3 months is worth consideration because of the good FJS and OKS scores, albeit with a risk of a persistent limp and limitation in knee extension and flexion.

Introduction

In total knee arthroplasty (TKA), the level of conformity, a medial stabilized (MS) implant, needs to restore native (i.e., healthy) knee kinematics without over-tensioning the flexion space when the surgeon chooses to retain the posterior cruciate ligament (PCL) is unknown. Whether an insert with a medial ball-in-socket conformity and lateral flat surface like the native knee or a less than spherical medial conformity restores higher and closer to native internal tibial rotation without anterior lift-off, an over-tension indicator, when implanted with calipered kinematic alignment (KA), is unknown.

Methods and materials

Two surgeons treated 21 patients with calipered KA and a PCL retaining MS implant. Validated verification checks that restore native tibial compartment forces in passive flexion without release of healthy ligaments were used to select the optimal insert thickness. A goniometer etched onto trial inserts with the ball-in-socket and the less than spherical medial conformity measured the tibial rotation relative to the femoral component at extension and 90° and 120° flexion. The surgeon recorded the incidence of anterior lift-off of the insert.

Results

The insert with the medial ball-in-socket and lateral flat surface restored more internal tibial rotation than the one with less than spherical medial conformity, with mean values of 19° vs. 17° from extension to 90° flexion (p < 0.01), and 23° vs. 20°-120° flexion (p < 0.002), respectively. There was no anterior lift-off of the insert at 90° and 120° flexion.

Conclusion

An MS insert with a medial ball-in-socket and lateral flat surface that matches the native knee's spherical conformity restores native tibial internal rotation when implanted with calipered KA and PCL retention without over-tensioning the flexion space.

The calipered kinematically-aligned (KA) total knee arthroplasty (TKA) strives to restore the patient's individual pre-arthritic (i.e., native) posterior tibial slope when retaining the posterior cruciate ligament (PCL). Deviations from the patient's individual pre-arthritic posterior slope tighten and slacken the PCL in flexion that drives tibial rotation, and such a change might compromise passive internal tibial rotation and coupled patellofemoral kinematics. Twenty-one patients were treated with a calipered KA TKA and a PCL retaining implant with a medial ball-in-socket and a lateral flat articular insert conformity that mimics the native (i.e., healthy) knee. The slope of the tibial resection was set parallel to the medial joint line by adjusting the plane of an angel wing inserted in the tibial guide. Three trial inserts that matched and deviated 2°> and 2°< from the patient's pre-arthritic slope were 3D printed with goniometric markings. The goniometer measured the orientation of the tibia (i.e., trial insert) relative to the femoral component. There was no difference between the radiographic preoperative and postoperative tibial slope (0.7 ± 3.2°, NS). From extension to 90° flexion, the mean passive internal tibial rotation with the pre-arthritic slope insert of 19° was greater than the 15° for the 2°> slope (p < 0.000), and 15° for the 2°< slope (p < 0.000). When performing a calipered KA TKA with PCL retention, the correct target for setting the tibial component is the patient's individual pre-arthritic slope within a tolerance of ±2°, as this target resulted in a 15-19° range of internal tibial rotation that is comparable to the 15-18° range reported for the native knee from extension to 90° flexion.

Introduction

Since the advent of antifibrinolytics, blood transfusions and their associated complications in total joint arthroplasty have decreased. Few studies have compared different antifibrinolytic types with respect to blood loss and transfusion rates. We sought to compare the blood loss and transfusion rates between epsilon-aminocaproic acid (EACA), tranexamic acid (TXA), and control.

Methods

A total of 564 patients underwent primary total hip or total knee arthroplasty at our institution. Patients were divided into 3 groups: 183 EACA, 204 TXA, and 177 control. Patient demographics, hemoglobin, transfusion rates, and blood loss were collected.

Results

Patient preoperative variables were similar. The control group had a mean estimated blood loss (EBL) of 1.48 L, with 51 units of packed red blood cells (pRBCs) given and 14.7% of patients receiving a blood transfusion. The EACA group had an EBL of 1.33 L, with 20 pRBCs given and 10.9% of patients receiving a transfusion. The TXA group had an EBL of 1.05 L, with 3 pRBCs transfused in 0.98% of patients. Compared with the control group, blood loss (P = 0.0014; P < 0.0001), number of pRBCs given (P = 0.007; P < 0.0001), and number of patients transfused (P = 0.012; P < 0.0001) were significantly lower in the EACA and TXA groups, respectively. TXA had significantly lower blood loss (P < 0.0001), lower number of tranfusions (P = 0.005), and less patients transfused (P = 0.003) compared with EACA.

Conclusion

Our study reports lower blood loss, transfusion rates, and number of patients needing transfusion with both EACA and TXA in the setting of total joint arthroplasty. When comparing between EACA and TXA, TXA had lower blood loss, transfusion rates, and number of patients requiring transfusion.