Seismic ground-motion data provide valuable constraints on explosion characteristics, such as yield and height-of-burst/depth-of-burial (HOB/DOB). This study investigated a range of seismic amplitude features and their efficacy in minimizing errors associated with yield estimation. Using a set of explosion recordings from experiments conducted in alluvium and sedimentary rock geologies, we investigated the effectiveness of three different seismic feature types over a range of different frequencies. Using both velocity and displacement data, we investigated the zero-to-peak (ZTP) amplitude of the first arriving P wave, the peak-to-peak (PTP) amplitude of the first arriving P wave, and the Prms amplitude over various time windows starting with the P wave. These three basic features were measured on both vertical component only data and the vertical–radial vector sum. In total, there were 56 different combinations investigated. Our seismic models combine the effects of scaled range and scaled HOB/DOB on the observed seismic features. The results show that the vertical–radial vector sum of the ZTP amplitudes measured on displacement seismograms most consistently produce models with the smallest difference between predicted amplitude values and observed amplitude values when accounting for both alluvium and sedimentary rock lithology. The improvement in fit to the data when incorporating the difference in source lithology is significant. If an alluvium lithology is assumed for a sedimentary rock lithology, the difference in yield could be up to ∼3.0 times the appropriate yield in the far field.

The geologic storage of carbon dioxide (CO2) is one method that can help reduce atmospheric CO2 by sequestering it into the subsurface. Large-scale deployment of geologic carbon storage, however, may be accompanied by induced seismicity. We present a project lifetime approach to address the induced seismicity risk at these geologic storage sites. This approach encompasses both technical and nontechnical stakeholder issues related to induced seismicity and spans the time period from the initial consideration phase to postclosure. These recommendations are envisioned to serve as general guidelines, setting expectations for operators, regulators, and the public. They contain a set of seven actionable focus areas, the purpose of which are to deal proactively with induced seismicity issues. Although each geologic carbon storage site will be unique and will require a custom approach, these general best practice recommendations can be used as a starting point to any site-specific plan for how to systematically evaluate, communicate about, and mitigate induced seismicity at a particular reservoir.

Enhanced Geothermal Systems could provide a substantial contribution to the global energy demand if their implementation could overcome inherent challenges. Examples are insufficient created permeability, early thermal breakthrough, and unacceptable induced seismicity. Here we report on the seismic response of a mesoscale hydraulic fracturing experiment performed at 1.5-km depth at the Sanford Underground Research Facility. We have measured the seismic activity by utilizing a 100-kHz, continuous seismic monitoring system deployed in six 60-m length monitoring boreholes surrounding the experimental domain in 3-D. The achieved location uncertainty was on the order of 1 m and limited by the signal-to-noise ratio of detected events. These uncertainties were corroborated by detections of fracture intersections at the monitoring boreholes. Three intervals of the dedicated injection borehole were hydraulically stimulated by water injection at pressures up to 33 MPa and flow rates up to 5 L/min. We located 1,933 seismic events during several injection periods. The recorded seismicity delineates a complex fracture network comprised of multistrand hydraulic fractures and shear-reactivated, preexisting planes of weakness that grew unilaterally from the point of initiation. We find that heterogeneity of stress dictates the seismic outcome of hydraulic stimulations, even when relying on theoretically well-behaved hydraulic fractures. Once hydraulic fractures intersected boreholes, the boreholes acted as a pressure relief and fracture propagation ceased. In order to create an efficient subsurface heat exchanger, production boreholes should not be drilled before the end of hydraulic stimulations.