Abstract. Manganese (Mn)-rich natural rock coatings, so-called rock varnishes, are discussed controversially regarding their genesis. Biogenic and abiogenic mechanisms, as well as a combination of both, have been proposed to be responsible for the Mn oxidation and deposition process. We conducted scanning transmission X-ray microscopy - near edge X-ray absorption fine structure spectroscopy (STXM-NEXAFS) measurements to examine the abundance and spatial distribution of the different oxidation states of Mn within these nano- to micrometer thick crusts. Such microanalytical measurements of thin and hard rock crusts require sample preparation with minimal contamination risk. Focused ion beam (FIB) slicing, a well-established technique in geosciences, was used in this study to obtain 100–200 nm thin slices of the samples for X-ray transmission spectroscopy. However, even though this preparation is suitable to investigate element distributions and structures in rock samples, we observed that, using standard parameters, modifications of the Mn oxidation states occur in the surfaces of the FIB slices. Based on our results, the preparation technique likely causes the reduction of Mn4+ to Mn2+/3+. We draw attention to this issue, since FIB slicing, SEM imaging, and other preparation and visualization techniques operating in the keV range are well-established in geosciences, but researchers are often unaware of the potential for reduction of Mn and possibly other elements in the samples’ surface layers.

The spatial distribution of transition metal valence states is of broad interest in the microanalysis of geological and environmental samples. An example is rock varnish, a natural manganese (Mn)-rich rock coating, whose genesis mechanism remains a subject of scientific debate. We conducted scanning transmission X-ray microscopy with near-edge X-ray absorption fine-structure spectroscopy (STXM-NEXAFS) measurements of the abundance and spatial distribution of different Mn oxidation states within the nano-to micrometer thick varnish crusts. Such microanalytical measurements of thin and hard rock crusts require sample preparation with minimal contamination risk. Focused ion beam (FIB) slicing was used to obtain ∼ 100-1000nm thin wedge-shaped slices of the samples for STXM, using standard parameters. However, while this preparation is suitable for investigating element distributions and structures in rock samples, we observed artifactual modifications of the Mn oxidation states at the surfaces of the FIB slices. Our results suggest that the preparation causes a reduction of Mn4+ to Mn2+. We draw attention to this issue, since FIB slicing, scanning electron microscopy (SEM) imaging, and other preparation and visualization techniques operating in the kilo-electron-volt range are well-established in geosciences, but researchers are often unaware of the potential for the reduction of Mn and possibly other elements in the samples.

X-ray microspectroscopy is a powerful analytical method in geoscientific and environmental research as it provides a unique combination of nanoscale imaging with high spectroscopic sensitivity at relatively low beam-related sample damage. In this study, "classical"scanning transmission soft X-ray microscopy (STXM) with X-ray absorption spectroscopy and the recently established soft X-ray ptychography are applied to the analysis of selected rock varnish samples from urban and arid desert environments. X-ray ptychography enhances the spatial resolution relative to STXM by up to 1 order of magnitude. With its high chemical sensitivity, it can resolve nanoscale differences in valence states of the key varnish elements manganese (Mn) and iron. Our results emphasize the complex nanoarchitecture of rock varnish as well as the diverse mineralogy of the Mn oxy-hydroxide matrix and its embedded dust grains. In contrast to the fast-growing urban varnish, the slow-growing arid desert varnish revealed a remarkable nanoscale stratification of alternating Mn valence states, providing hints on the layer-wise and still enigmatic growth process.

Black manganese-rich crusts are found worldwide on the façades of historical buildings. In this study, they were studied exemplarily on the façade of the Freiburger Münster (Freiburg Minster), Germany, and measured in-situ by portable X-ray fluorescence (XRF). The XRF was calibrated to allow the conversion from apparent mass fractions to Mn surface density (Mn mass per area), to compensate for the fact that portable XRF mass fraction measurements from thin layers violate the assumption of a homogeneous measurement volume. Additionally, 200-nm femtosecond laser ablation-inductively coupled plasma-mass spectrometry (fs LA-ICP-MS) measurements, scanning transmission X-ray microscopy-near edge X-ray absorption fine structure spectroscopy (STXM-NEXAFS), Raman spectroscopy, and imaging by light microscopy were conducted to obtain further insight into the crust material, such as potential biogenic contributions, element distributions, trace element compositions, and organic functional groups. While black crusts of various types are present at many places on the minster's facade, crusts rich in Mn (with a Mn surface density >150 μg cm−2) are restricted to a maximum height of about 7 m. The only exceptions are those developed on the Renaissance-Vorhalle (Renaissance Portico) at a height of about 8 m. This part of the façade had been cleaned and treated with a silicon resin as recently as 2003. These crusts thus accumulated over a period of only 12 years. Yet, they are exceptionally Mn-rich with a surface density of 1200 μg cm−2, and therefore require an accumulation rate of about 100 μg cm−2 Mn per year. Trace element analyses support the theory that vehicle emissions are responsible for most of the Mn supply. Lead, barium, and zinc correlate with manganese, indicating that tire material, brake pads, and resuspended road dust are likely to be the element sources. Microscopic investigations show no organisms on or in the Mn-rich crusts. In contrast, Mn-free black crusts sampled at greater heights (>8 m) exhibited fungal and cyanobacterial encrustation. Carbon-rich spots were found by STXM-NEXAFS underneath one of the Mn-rich crusts. However, these carbon occurrences originate from soot and polycyclic aromatic hydrocarbons (PAHs) deposited on top of the crust, rather than from organisms responsible for the crust's formation, as shown by STXM-NEXAFS and Raman spectroscopic measurements. Our results suggest that the crusts develop abiogenically, with vehicle emissions as dominant element sources.

Air pollution and climate change are potential drivers for the increasing burden of allergic diseases. The molecular mechanisms by which air pollutants and climate parameters may influence allergic diseases, however, are complex and elusive. This article provides an overview of physical, chemical and biological interactions between air pollution, climate change, allergens, adjuvants and the immune system, addressing how these interactions may promote the development of allergies. We reviewed and synthesized key findings from atmospheric, climate, and biomedical research. The current state of knowledge, open questions, and future research perspectives are outlined and discussed. The Anthropocene, as the present era of globally pervasive anthropogenic influence on planet Earth and, thus, on the human environment, is characterized by a strong increase of carbon dioxide, ozone, nitrogen oxides, and combustion- or traffic-related particulate matter in the atmosphere. These environmental factors can enhance the abundance and induce chemical modifications of allergens, increase oxidative stress in the human body, and skew the immune system toward allergic reactions. In particular, air pollutants can act as adjuvants and alter the immunogenicity of allergenic proteins, while climate change affects the atmospheric abundance and human exposure to bioaerosols and aeroallergens. To fully understand and effectively mitigate the adverse effects of air pollution and climate change on allergic diseases, several challenges remain to be resolved. Among these are the identification and quantification of immunochemical reaction pathways involving allergens and adjuvants under relevant environmental and physiological conditions.