The structure of laminar inverse diffusion flames (IDFs) of methane and ethylene was studied using a cylindrical co-flowing burner. Several flames of the same fuel flow-rate yet various air flow-rates were examined. Heights of visible flames were obtained using measurements of hydroxyl (OH) laser-induced fluorescence (LIF) and visible images. Polycyclic aromatic hydrocarbon (PAH) LIF and soot laser-induced incandescence (LII) were also measured. In visible images, radiating soot masks the blue region typically associated with the flame height in normal diffusion flames (NDFs). Increased air flow-rates resulted in longer flames. PAH LIF and soot LII indicated that PAH and soot are present on the fuel side of the flame and that soot is located closer to the reaction zone than PAH. Ethylene flames produced significantly higher PAH LIF and soot LII signals than methane flames, which is consistent with the sooting propensity of

Flame heights of co-flowing cylindrical ethylene-air and methane-air laminar inverse diffusion flames were measured. The luminous flame height was found to be longer than the height of the reaction zone determined by planar laser-induced fluorescence (PLIF) of hydroxyl radicals (OH) because of luminous soot above the reaction zone. However, the location of the peak luminous signals along the centerline agreed very well with the OH flame height. Flame height predictions using Roper’s analysis for circular port burners agreed with measured reaction zone heights when using values for the characteristic diffusion coefficient and/or diffusion temperature somewhat different from those recommended by Roper. The fact that Roper’s analysis applies to inverse diffusion flames is evidence that inverse diffusion flames are similar in structure to normal diffusion flames.