Skip to main content
eScholarship
Open Access Publications from the University of California

Trap-Assisted Charge Injection into Large Bandgap Polymer Semiconductors.

  • Author(s): Wang, Dongdong
  • Fina, Michael
  • Kim, Suhan
  • Zhang, Chunmei
  • Zhang, Ting
  • Deng, Yonghong
  • Chen, Kai
  • Liang, Lijuan
  • Mao, Samuel S
  • Minor, Andrew M
  • Liu, Gao
  • et al.
Abstract

The trap-assisted charge injection in polyfluorene-poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) model systems with an Al or Al/LiF cathode is investigated. We find that inserting 1.3 nm LiF increases electron and hole injections simultaneously and the increase of holes is greater than electrons. The evolution of internal interfaces within polymer light-emitting diodes is observed by transmission electron microscopy, which reveals that the introduction of LiF improves the interface stability at both the cathode (cathode/polymer) and the anode (indium tin oxide (ITO)/PEDOT:PSS). Above-mentioned experimental results have been compared to the numerical simulations with a revised Davids model and potential physical mechanisms for the trap-assisted charge injection are discussed.

Main Content
Current View