3D‐Printed Graded Electrode with Ultrahigh MnO2 Loading for Non‐Aqueous Electrochemical Energy Storage
Skip to main content
eScholarship
Open Access Publications from the University of California

UC Santa Cruz

UC Santa Cruz Previously Published Works bannerUC Santa Cruz

3D‐Printed Graded Electrode with Ultrahigh MnO2 Loading for Non‐Aqueous Electrochemical Energy Storage

Abstract

Abstract: Electrolytic manganese dioxide is one of the promising cathode candidates for electrochemical energy storage devices due to its high redox capacity and ease of synthesis. Yet, high‐loading MnO2 often suffers from sluggish reaction kinetics, especially in non‐aqueous electrolytes. The non‐uniform deposition of MnO2 on a porous current collectors also makes it difficult to fully utilize the active materials at high mass loading. Here, a 3D printed graded graphene aerogel (3D GA) that contains sparsely separated exterior ligaments is developed to create large open channels for mass transport as well as densely arranged interior ligaments providing large ion‐accessible active surface. The unique structural design homogenizes the thickness of electro deposited MnO2 even at an ultrahigh mass loading of ≈70 mg cm−2. The electrode achieves a remarkable volumetric capacity of 29.1 mA h cm−3 in the non‐aqueous electrolyte. A Li‐ion hybrid capacitor device assembled with a graded 3D GA/MnO2 cathode and graded 3D GA/VOx anode exhibits a wide voltage window of 0–4 V and a superior volumetric energy density of 20.2 W h L−1. The findings offer guidance on 3D printed electrode design for supporting ultrahigh loading of active materials and developments of high energy density energy storage devices.

Many UC-authored scholarly publications are freely available on this site because of the UC's open access policies. Let us know how this access is important for you.

Main Content
For improved accessibility of PDF content, download the file to your device.
Current View