- Main
Water Uptake in PEMFC Catalyst Layers
Abstract
Water uptake profiles of proton-exchange-membrane fuel-cell catalyst layers are characterized in the form of capillary-pressure saturation (Pc-S) curves. The curves indicate that the catalyst layers tested are highly hydrophilic and require capillary pressures as low as -80 kPa to eject imbibed water. Comparison of materials made with and without Pt indicates a difference in water ejection and uptake phenomena due to the presence of Pt. The addition of Pt increases the tendency of the catalyst layer to retain water. Dynamic vapor sorption (DVS) is used to characterize the water-vapor sorption onto Nafion, Pt/C, and C surfaces. The DVS results align with the trends found from the Pc-S curves and show an increased propensity for water uptake in the presence of Pt. The effect of the ion in Nafion, sodium or protonated form, is also compared and demonstrates that although the protonation of the Nafion in the catalyst layer also increases hydrophilicity, the effect is not as great as that caused by Pt.
Main Content
Enter the password to open this PDF file:
-
-
-
-
-
-
-
-
-
-
-
-
-
-