Skip to main content
Download PDF
- Main
Quantitative hemodynamic imaging: a method to correct the effects of optical properties on laser speckle imaging
Published Web Location
https://doi.org/10.1117/1.nph.10.4.045001Abstract
Significance
Studying cerebral hemodynamics may provide diagnostic information on neurological conditions. Wide-field imaging techniques, such as laser speckle imaging (LSI) and optical intrinsic signal imaging, are commonly used to study cerebral hemodynamics. However, they often do not account appropriately for the optical properties of the brain that can vary among subjects and even during a single measurement. Here, we describe the combination of LSI and spatial-frequency domain imaging (SFDI) into a wide-field quantitative hemodynamic imaging (QHI) system that can correct the effects of optical properties on LSI measurements to achieve a quantitative measurement of cerebral blood flow (CBF).Aim
We describe the design, fabrication, and testing of QHI.Approach
The QHI hardware combines LSI and SFDI with spatial and temporal synchronization. We characterized system sensitivity, accuracy, and precision with tissue-mimicking phantoms. With SFDI optical property measurements, we describe a method derived from dynamic light scattering to obtain absolute CBF values from LSI and SFDI measurements. We illustrate the potential benefits of absolute CBF measurements in resting-state and dynamic experiments.Results
QHI achieved a 50-Hz raw acquisition frame rate with a 10×10 mm field of view and flow sensitivity up to ∼4 mm/s. The extracted SFDI optical properties agreed well with a commercial system (R2≥0.98). The system showed high stability with low coefficients of variations over multiple sessions within the same day (<1%) and over multiple days (<4%). When optical properties were considered, the in-vivo hypercapnia gas challenge showed a slight difference in CBF (-1.5% to 0.5% difference). The in-vivo resting-state experiment showed a change in CBF ranking for nine out of 13 animals when the correction method was applied to LSI CBF measurements.Conclusions
We developed a wide-field QHI system to account for the confounding effects of optical properties on CBF LSI measurements using the information obtained from SFDI.Many UC-authored scholarly publications are freely available on this site because of the UC's open access policies. Let us know how this access is important for you.
Main Content
For improved accessibility of PDF content, download the file to your device.
Enter the password to open this PDF file:
File name:
-
File size:
-
Title:
-
Author:
-
Subject:
-
Keywords:
-
Creation Date:
-
Modification Date:
-
Creator:
-
PDF Producer:
-
PDF Version:
-
Page Count:
-
Page Size:
-
Fast Web View:
-
Preparing document for printing…
0%