Skip to main content
eScholarship
Open Access Publications from the University of California

Vanadium oxide coatings to self-regulate current sharing in high-temperature superconducting cables and magnets

Published Web Location

https://doi.org/10.1063/5.0013783
Abstract

High-temperature superconductors such as REBa2Cu3O7 - δ (REBCO, RE = rare earth) enable high-current cables and high-field magnets. By removing the turn-to-turn insulation in a magnet application, recent experiments demonstrated that REBCO magnets can self-protect against catastrophic damage during a superconducting-to-normal transition (quench), i.e., when the stored magnetic energy rapidly converts to heat. The current can bypass the hot spot during a quench, thereby reducing the localized heat dissipation. The removal of the insulation between turns, however, leads to excessive eddy currents during current ramping, thereby forcing a much-prolonged magnet charging time. To address this issue, we investigate vanadium oxide (VOx) coatings as a temperature-dependent self-switching medium that automatically manages current sharing. VOx coatings (with 1.70 ≤ × ≤ to 2.07) were deposited by reactive cathodic arc deposition, initially on insulating glass to determine the electrical properties, and later on commercial REBCO tapes. The coatings are x-ray amorphous but with a short-range crystalline ordering according to Raman spectrometry. The resistivity of VOx decreased by at least three orders of magnitude when the temperature increased from 80 to 300 K. The coating process is compatible with commercial REBCO tapes as evidenced by the negligible change in the critical current caused by the coating process. The results from current sharing experiments and circuit analysis suggest that the VOx coating can effectively self-regulate current sharing in REBCO magnets, suppress excessive eddy currents, and enable self-protection during quenches.

Main Content
For improved accessibility of PDF content, download the file to your device.
Current View