UC Davis

Microfluidic-assisted particle fabrication provides a route to circumvent the disadvantages associated with traditional methods of polymeric particle generation, such as low drug loading efficiency, challenges in controlling encapsulated drug release rates, batch-to-batch variability in particle physical properties and formulation instability. However, this approach primarily produces particles with nanometer size dimensions, which limits drug delivery modalities. Herein, we systematically studied parameters for the generation of micron-sized poly(lactic-co-glycolic) acid (PLGA) particles using a microfluidic system, the NanoAssemblr benchtop. Initially, we used two organic solvents that have been reported suitable for the fabrication of PLGA nanoparticles - acetone and acetonitrile. Subsequently, we methodically manipulated polymer concentration, organic: aqueous flow rate ratios, total flow rate, organic phase composition, and surfactant concentration to develop a route for the fabrication of micron-sized PLGA particles. Further, we incorporated hydroxychloroquine (HCQ), a clinically approved drug for malaria and lymphoma, and measured how its incorporation impacted particle physicochemical properties. Briefly, altering the organic phase composition by including ethyl acetate (less polar solvent), resulted in micron-scale particles, as well as increased polydispersity indexes (PDIs). Adjusting the surfactant concentration of poly vinyl alcohol (PVA) after the addition of these solvent mixtures rendered large particles with lower PDI variability. Moreover, encapsulation of HCQ influenced particle hydrodynamic diameter and PDI in a PVA concentration dependent manner. Finally, we demonstrated that unloaded and HCQ-loaded microparticles did not affect the viability of RAW 264.7 macrophages. This study provides an itinerary for fabricating biocompatible, drug-loaded, micron-sized polymeric particles, particularly when the drug of interest is not readily soluble in conventional organic solvents.