Skip to main content
eScholarship
Open Access Publications from the University of California

UC Davis

UC Davis Previously Published Works bannerUC Davis

Inverse kinematics for optimal tool orientation control in 5-axis CNC machining

Abstract

The problem of determining the inputs to the rotary axes of a 5-axis CNC machine is addressed, such that relative variations of orientation between the tool axis and surface normal are minimized subject to the constraint of maintaining a constant cutting speed with a ball-end tool. In the context of an orientable-spindle machine, the results of a prior study are directly applicable to the solution of this inverse-kinematics problem. However, since they are expressed in terms of the integral of the geodesic curvature, a discrete time-step solution is proposed that yields accurate rotary-axis increments at high sampling frequencies. For an orientable-table machine, a closed-form solution that specifies the rotary-axis positions as functions of the surface normal variation along the toolpath is possible. In this context, however, the feasibility of a solution is dependent upon the surface normal along the toolpath satisfying certain orientational constraints. These inverse-kinematics solutions facilitate accurate and efficient 5-axis machining of free-form surfaces without "unnecessary" actuation of the machine rotary axes. © 2013 Elsevier B.V.

Many UC-authored scholarly publications are freely available on this site because of the UC's open access policies. Let us know how this access is important for you.

Main Content
For improved accessibility of PDF content, download the file to your device.
Current View