UC Santa Barbara

Traditional approaches to establishing critical water quality conditions, based on statistical analysis of low flow conditions and expressed as a recurrence interval for low flow conditions (e.g., 7Q10), may be inappropriate for drier watersheds. The use of 7Q10 as a standard design flow assumes year-round flow, but in these watersheds, 7Q10 is zero or very small. In addition, the increasing use of multiple year dynamic water quality models at daily time steps can supercede the use of steady state approaches. Many of these watersheds are also under increasing urbanization pressure, which accentuates the flashiness of runoff and the episodic nature of critical water quality conditions. To illustrate, the conditions in the Santa Clara River, California, are considered. A statistical analysis indicates that higher inorganic nitrogen concentrations correlate strongly with low flow. However, peaks in concentrations can occur during the first storms, particularly where nonpoint source contribution is significant. Critical conditions can thus occur at different flow regimes depending on the relative magnitude of flow and pollutant contributions from various sources. The use of steady state models for these dry semi-urbanized watersheds based on 7Q10 flows is thus unlikely to accurately simulate the potential for exceeding water quality objectives. Dynamic simulation of water quality is necessary, and as the recent intense storm event sampling data indicate, the models should be formulated to consider even smaller time steps. This places increasing demand on computational resources and datasets to accurately calibrate the models at this temporal resolution.