UC Berkeley

Hypothesis

The wetting behavior of an electrolyte solution on the separator, determined by contact-angle measurements, has a significant effect on the internal resistance of the battery and on its cycle life. The solvent, the lithium-salt type and its concentration may affect the wettability. However, few systematic studies address the effect of salt concentration on surface tension and contact angle.

Experiments

Surface tensions and advancing contact angles were measured for dimethyl sulfoxide (DMSO), propylene carbonate (PC), dimethyl carbonate (DMC), and a PC/DMC mixture (1:1 mass ratio) with various concentrations of a lithium salt (LiClO₄, LiPF₆, and LiTFSI) at 23 °C. Measurements were made by a Krüss Drop Shape Analyzer 100, with a video camera mounted on a microscope to record the drop image.

Findings

For DMSO, PC and PC/DMC, surface tensions increase by adding LiClO₄ or LiPF₆ but decrease upon addition of LiTFSI. For DMC, the lithium salts have little impact on the surface tensions. For each solvent, contact angles and adhesion energies follow the same trend as those for surface tensions. The TFSI- anion reduces the surface tension of the solvent, favoring good wettability of the separator. The optimal surface tension for wettability of Celgard 2500 is at or below 26.1 mN/m.