Objectives

To compare regional differences in subchondral trabecular structure using high-resolution MRI in meniscus-covered/meniscus-uncovered tibia in cadaveric knees with intact/torn menisci.

Materials and methods

3D proton density CUBE MRI of 6 cadaveric knees without significant osteoarthritis (OA) was acquired, 0.25-mm resolution. Menisci were evaluated and classified intact or torn. MR data were transferred to ImageJ program to segment tibial 3D volume of interest (VOI). Data was subdivided into meniscus-covered/meniscus-uncovered regions. Segmented VOI was classified into binary data, trabeculae/bone marrow. The trabecular bone data was used to measure MR biomarkers (apparent subchondral plate-connected bone density (adapted from spine MR), apparent trabecular bone volume fraction, apparent mean trabecular thickness, apparent connectivity density, and structure model index (SMI)). Mean value of parameters was analyzed for the effects of meniscal tear/tibial coverage.

Results

Nine torn menisci and 3 intact menisci were present. MR measures of bone varied significantly due to meniscal coverage/tear. Subchondral plate-connected bone density under covered meniscus regions increased from 10.9 to 23.5% with meniscal tear. Values increased in uncovered regions, 19.3% (intact) and 32.4% (torn). This reflects higher density when uncovered (p = 0.048) with meniscal tear (p = 0.007). Similar patterns were found for trabecular bone fraction (coverage p < 0.001, tear p = 0.047), trabecular thickness (coverage p = 0.03), connectivity density (coverage p = 0.002), and SMI (coverage p = 0.015).

Conclusion

Quantitative trabecular bone evaluation emphasizes intrinsic structural differences between meniscus-covered/meniscus-uncovered tibias. Results offer insight into bone adaptation with meniscal tear and support the hypothesis that subchondral bone plate-connected bone density could be important in early subchondral bone adaptation.

Magnetic resonance (MR) imaging has been widely implemented as a non-invasive modality to investigate musculoskeletal (MSK) tissue disease, injury, and pathology. Advancements in MR sequences provide not only enhanced morphologic contrast for soft tissues, but also quantitative biochemical evaluation. Ultrashort time to echo (UTE) sequence, in particular, enables novel morphologic and quantitative evaluation of previously unseen MSK tissues. By using short minimum echo times (TE) below 1 msec, the UTE sequence can unveil short T2 properties of tissues including the deepest layers of the articular cartilage, cartilaginous endplate at the discovertebral junction, the meniscus, and the cortical bone. This article will discuss the application of UTE to evaluate these MSK tissues, starting with tissue structure, MR imaging appearance on standard versus short and ultrashort TE sequences, and provide the range of quantitative MR values found in literature.

Background

To determine if the application of tensile force alters the single- or bi-component T2* values of human tendons as measured on a clinical MRI scanner with ultrashort echo time (UTE sequences and if single- or bi-component T2* values differ when measured with 2D-UTE, 3D-UTE, or 3D-UTE-Cones sequences.

Methods

Ten tendons were imaged before and during the application of tension using various UTE sequences at 3 Tesla. Single and bi-component T2* analysis was performed pre- and posttension and compared with Bonferroni-corrected paired Wilcoxon tests.

Results

Range of mean pre- and posttension T2* analysis values were: short T2* fraction (78.6-79.7% and 77.3-79.7%, respectively; P = 1.0 for all sequences), long T2* fraction (20.3-21.4% and 20.3-22.7%, respectively; P = 1.0 for all sequences), short T2* (0.9-1.0 ms and 0.9 ms, respectively; P = 1.0 for all sequences), long T2* (19.9-20.4 ms and 21.9-24.0 ms, respectively; P = 0.9 for 2D-UTE and P = 1.0 for 3D-UTE and 3D-UTE-Cones), and single-component T2* (2.3-2.5 ms and 2.5-3.2 ms, respectively; P = 1.0 for all sequences).

Conclusion

No significant difference in single- or bi-component results was found after the application of tension to tendons. Results are similar regardless of UTE sequence used for acquisition.

Objective

To evaluate ultrashort time to echo (UTE) magnetic resonance (MR) morphology of the cartilaginous endplates (CEP) in cadaveric lumbar spines with bony vertebral endplate (VEP) lesions, to determine inter-reader agreement as well as associations between the CEP morphology and VEP lesions as well as other abnormalities.

Materials and methods

MR imaging of cadaveric lumbar spines from 10 donors was performed at 3T using a UTE MR sequence. Two musculoskeletal radiologists identified the location of vertebral endplate lesions in consensus. The morphology of the CEP overlying the lesions and in the adjacent normal regions was assessed individually. A total of 55 vertebral lesions and 55 normal regions were assessed. The presence of osteophytosis, morphological changes of the anterior and posterior longitudinal ligament, and intervertebral disc signal and morphology was also assessed. Agreement between observers was determined using Cohen's kappa analysis, and association between CEP and vertebral endplate lesions was determined using the chi square test.

Results

Fifty-five vertebral endplate lesions were identified and the morphology of CEP evaluated by two readers was in substantial agreement with Cohen's kappa of 0.78. The presence of vertebral endplate abnormality was associated with the presence of osteophytes (39 out of 55 levels), altered morphology and signal of the anterior longitudinal ligament (23 out of 55 levels) and intervertebral discs (30 out of 55 levels).

Conclusion

UTE MRI enables evaluation of the CEP with substantial inter-reader agreement. Abnormal changes of the CEP may facilitate formation of lesions of vertebral endplate over time and are associated with degenerative changes of the lumbar spine.

Background

To determine if off-saturation ratio (OSR) measured with the ultrashort echo time magnetization transfer (UTE-MT) sequence could differentiate between tendons under different states of tensile load and to compare these changes between normal versus degenerated tendons.

Methods

Fourteen tendons were imaged at 3 Tesla before and during the application of 0.5-1 kg tension. A two-dimensional (2D) -UTE-MT sequence with 1.5, 3, and 5 kHz frequency offsets was used on nine tendons and a 3D-UTE-MT sequence with 1.5 kHz frequency offset was used on five tendons. OSR was calculated and compared for each condition. Histologic correlation was performed using light microscopy.

Results

In general, OSR increased after the application of tension. Mean increase of 2D OSR was 0.035 (95% confidence interval [CI], 0.013-0.056) at 1.5 kHz offset (P < 0.01), 0.031 (95% CI, 0.023-0.040) at 3 kHz offset (P < 0.01), and 0.013 (95% CI, -0.013-0.027) at 5 kHz offset (P = 0.07) from pre- to posttension states. Mean increase of 3D OSR was 0.026 (95% CI, 0.008-0.044) at a 1.5 kHz offset (P = 0.02) from pre- to posttension states. Mean decrease of 2D OSR at 1.5 kHz offset was 0.074-0.087 when comparing normal versus degenerated tendons (P < 0.01).

Conclusion

OSR as measured with 2D or 3D UTE-MT sequences can detect the changes in hydration seen when tendons are placed under two different states of tensile load, but these changes are smaller than those encountered when comparing between normal versus pathologic tendons. Lower off-resonance saturation frequencies (3 kHz or less) are more sensitive to these changes than higher off-resonance saturation frequencies.

Objective

To evaluate pathology of the triangular fibrocartilage complex (TFCC) using high-resolution morphologic magnetic resonance (MR) imaging, and compare with quantitative MR and biomechanical properties.

Materials and methods

Five cadaveric wrists (22-70 years) were imaged at 3 T using morphologic (proton density weighted spin echo, PD FS, and 3D spoiled gradient echo, 3D SPGR) and quantitative MR sequences to determine T2 and T1rho properties. In eight geographic regions, morphology of TFC disc and laminae were evaluated for pathology and quantitative MR values. Samples were disarticulated and biomechanical indentation testing was performed on the distal surface of the TFC disc.

Results

On morphologic PD SE images, TFC disc pathology included degeneration and tears, while that of the laminae included degeneration, degeneration with superimposed tear, mucinous transformation, and globular calcification. Punctate calcifications were highly visible on 3D SPGR images and found only in pathologic regions. Disc pathology occurred more frequently in proximal regions of the disc than distal regions. Quantitative MR values were lowest in normal samples, and generally higher in pathologic regions. Biomechanical testing demonstrated an inverse relationship, with indentation modulus being high in normal regions with low MR values. The laminae studied were mostly pathologic, and additional normal samples are needed to discern quantitative changes.

Conclusion

These results show technical feasibility of morphologic MR, quantitative MR, and biomechanical techniques to characterize pathology of the TFCC. Quantitative MRI may be a suitable surrogate marker of soft tissue mechanical properties, and a useful adjunct to conventional morphologic MR techniques.

Objectives

In human menisci, we aimed to investigate whether calcium pyrophosphate crystal deposition (CPPD) affects biomechanical and quantitative MR properties, and their zonal distribution.

Materials and methods

From 9 cadaveric knees, sectioned triangular meniscus pieces were harvested. Samples were classified into "normal" or "CPPD" groups based upon visual inspection. Micro computed tomography scan verified CPPD. Using magnetic resonance imaging, ultrashort echo time (UTE) T2* and spin echo (SE) T2, quantitative values in 3 zones (red, red-white, and white) were determined. Using biomechanical test, indentation forces in the same zones were determined. Effects of CPPD and meniscal zone on indentation force and quantitative MR values were compared.

Results

On UTE MRI scans, CPPD-affected menisci exhibited punctate dark regions, found mostly (92%) in avascular white and red-white zones. Indentation forces were significantly higher for CPPD samples in the red-white (all P < 0.02) and white (all P < 0.004) zones but not in the vascular red zone (all P > 0.2). Similarly, UTE T2* red zone values were similar between both groups (~6.6 milliseconds, P = 0.8), whereas in the red-white and white zones, CPPD samples had significantly lower values (~5.1 milliseconds, P = 0.005 to 0.007). In contrast, SE T2 values showed no difference with CPPD (P = 0.12 to 0.16). UTE T2*, but not SE T2, correlated significantly with indentation force (R = -0.29, P = 0.009).

Conclusions

Dark CPP deposits were detectable on UTE images featuring high signal intensity from surrounding meniscal tissue. Preliminary results indicate that CPP deposits were almost exclusively found in the avascular zones. Compared with normal, CPPD menisci featured higher indentation stiffness and lower UTE T2* values in the affected zones.

Purpose To determine the relationship between lamellar layer thickness on ultrashort echo time (UTE) magnetic resonance (MR) images and indentation stiffness of human menisci and to compare quantitative MR imaging values between two groups with normal and abnormally thick lamellar layers. Materials and Methods This was a HIPAA-compliant, institutional review board-approved study. Nine meniscal pieces were obtained from seven donors without gross meniscal pathologic results (mean age, 57.4 years ± 14.5 [standard deviation]). UTE MR imaging and T2, UTE T2*, and UTE T1ρ mapping were performed. The presence of abnormal lamellar layer thickening was determined and thicknesses were measured. Indentation testing was performed. Correlation between the thickness and indentation stiffness was assessed, and mean quantitative MR imaging values were compared between the groups. Results Thirteen normal lamellar layers had mean thickness of 232 μm ± 85 and indentation peak force of 1.37 g ± 0.87. Four abnormally thick lamellar layers showed mean thickness of 353.14 μm ± 98.36 and peak force 0.72 g ± 0.31. In most cases, normal thicknesses showed highly positive correlation with the indentation peak force (r = 0.493-0.912; P < .001 to .05). However, the thickness in two abnormal lamellar layers showed highly negative correlation (r = -0.90, P < .001; and r = -0.23, P = .042) and no significant correlation in the others. T2, UTE T2*, and UTE T1ρ values in abnormally thick lamellar layers were increased compared with values in normal lamellar layers, although only the UTE T2* value showed significant difference (P = .010). Conclusion Variation of lamellar layer thickness in normal human menisci was evident on two-dimensional UTE images. In normal lamellar layers, thickness is highly and positively correlated with surface indentation stiffness. UTE T2* values may be used to differentiate between normal and abnormally thickened lamellar layers. (©) RSNA, 2016.

Objective

To implement high-resolution morphologic and quantitative magnetic resonance imaging (MRI) of the temporomandibular joint (TMJ) using ultrashort time-to-echo (UTE) techniques in cadavers and volunteers.

Methods

This study was approved by the institutional review board. TMJs of cadavers and volunteers were imaged on a 3-T MR system. High-resolution morphologic and quantitative sequences using conventional and UTE techniques were performed in cadaveric TMJs. Morphologic and UTE quantitative sequences were performed in asymptomatic and symptomatic volunteers.

Results

Morphologic evaluation demonstrated the TMJ structures in open- and closed-mouth position. UTE techniques facilitated the visualization of the disc and fibrocartilage. Quantitative UTE MRI was successfully performed ex vivo and in vivo, reflecting the degree of degeneration. There was a difference in the mean UTE T2* values between asymptomatic and symptomatic volunteers.

Conclusions

MRI evaluation of the TMJ using UTE techniques allows characterization of the internal structure and quantification of the MR properties of the disc. Quantitative UTE MRI can be performed in vivo with short scan times.

Magnetization transfer (MT) imaging is one way to indirectly assess pools of protons with fast transverse relaxation. However, conventional MT imaging sequences are not applicable to short T2 tissues such as cortical bone. Ultrashort echo time (UTE) sequences with TE values as low as 8 µs can detect signals from different water components in cortical bone. In this study we aim to evaluate two-dimensional UTE-MT imaging of cortical bone and its application in assessing cortical bone porosity as measured by micro-computed tomography (μCT) and biomechanical properties. In total, 38 human cadaveric distal femur and proximal tibia bones were sectioned to produce 122 rectangular pieces of cortical bone for quantitative UTE-MT MR imaging, μCT, and biomechanical testing. Off-resonance saturation ratios (OSRs) with a series of MT pulse frequency offsets (Δf) were calculated and compared with porosity assessed with μCT, as well as elastic (modulus, yield stress, and strain) and failure (ultimate stress, failure strain, and energy) properties, using Pearson correlation and linear regression. A moderately strong negative correlation was observed between OSR and μCT porosity (R(2)  = 0.46-0.51), while a moderate positive correlation was observed between OSR and yield stress (R(2)  = 0.25-0.30) and failure stress (R(2)  = 0.31-0.35), and a weak positive correlation (R(2)  = 0.09-0.12) between OSR and Young's modulus at all off-resonance saturation frequencies. OSR determined with the UTE-MT sequence provides quantitative information on cortical bone and is sensitive to μCT porosity and biomechanical function.