Skip to main content
eScholarship
Open Access Publications from the University of California

UC San Diego

UC San Diego Electronic Theses and Dissertations bannerUC San Diego

Monolithically-Integrated GaN Supply Modulators for High-Power, High-Voltage Power Amplifiers

Abstract

Improving power amplifier efficiency has long been a critical objective in the design of wireless transmitters. This challenge is particularly important in high-voltage, high-power applications such as 5G base stations and direct-to-cell satellite communications, where power amplifier efficiency significantly impacts system power consumption, thermal management, and operating cost. Among the many techniques developed to enhance power amplifier efficiency, envelope tracking (ET) has emerged as a widely adopted solution. As communication signals continue to evolve toward wider bandwidths and higher peak-to-average power ratios (PAPRs), conventional ET implementations face increasing challenges in achieving both high efficiency and fast supply modulation. Digital envelope tracking (DET) has recently emerged as an effective approach to address these challenges.This dissertation presents a monolithically integrated GaN adjustable supply modulator architecture for DET operation targeting high-voltage, high-power power amplifiers. The work begins with an analysis of DET techniques and state-of-the-art implementations, highlighting the challenges associated with deploying ET in FR1 base stations and massive MIMO systems. A discrete DET implementation is developed and experimentally evaluated to identify the limitations of conventional architectures and to motivate the proposed monolithic GaN solution.The proposed integrated architecture is implemented in an emerging 500-nm GaN-on-Si process and validated through standalone measurements and full-system testing with a commercial power amplifier. The supply modulator supports four simultaneously tunable voltage levels with sub-symbol tracking capability, achieves a peak conversion efficiency of 95% at generated step-down levels, and delivers a rated output power of 74 W from a 48-V supply. System-level measurements demonstrate an improvement in overall transmitter power-added efficiency (PAE) from 32% to 39% at a tracking frequency of 2 MHz.In addition, linearity measurements under sub-symbol tracking operation are performed using digital predistortion (DPD), providing insight into the trade-offs among tracking bandwidth, efficiency, and modulation linearity. The presented architecture, implementation techniques, and experimental results establish the feasibility of monolithically integrated GaN DET systems and provide practical design guidance for future high-efficiency wideband wireless transmitters.

Main Content

This item is under embargo until November 13, 2028.