Skip to main content
eScholarship
Open Access Publications from the University of California

UC Merced

UC Merced Electronic Theses and Dissertations bannerUC Merced

Hierarchical Carbon Electrodes from 3D Printed Polymers via Transition Metal–Catalyzed Pyrolysis and Tannic Acid Integration

Creative Commons 'BY' version 4.0 license
Abstract

Today, the transition to renewable energy systems has highlighted the need for efficient energy storage technologies to address the intermittent nature of sources such as solar and wind. While electrochemical devices such as supercapacitors and batteries offer viable solutions, their performance is often constrained by conventional electrode fabrication methods that limit active material loading, ion transport, and structural control. Designing three-dimensional (3D) electrodes provides a pathway to overcome these limitations by enabling thick, architected structures with high surface area and improved mass transport. Additive manufacturing of 3D electrodes enables precise control of electrode geometry, thereby increasing energy storage capacity through well-defined hierarchical structures. However, the resolution of conductive materials is limited in 3D printing, and polymers with high printability and high resolution don’t have ideal conductivity for electrode applications. Therefore, converting these printed polymers into electrically conductive carbon frameworks is a promising route for fabricating high-resolution, easily prepared 3D electrodes. However, carbonization typically requires high-temperature pyrolysis, which introduces challenges such as structural shrinkage, deformation, and low carbon yield, ultimately limiting the effectiveness of the resulting 3D electrodes. This dissertation presents a systematic approach to the fabrication and performance enhancement of three-dimensional (3D) printed carbon electrodes for advanced supercapacitor applications.Chapter one outlinesthe growing importance of architected 3D electrodes enabled by additive manufacturing, highlighting current limitations in conductivity, surface area, and scalability of polymer-derived carbon structures. This chapter summarizes the current additive manufacturing process for preparing 3D electrodes and the limitations of converting polymer-based 3D templates into carbonaceous 3D electrodes.Chapter two investigates the role of transition-metal-based catalysts in the pyrolytic conversion of PR48- based 3D-printed polymers into conductive carbon frameworks, with an emphasis on char yield, structural retention, and graphitization.In Chapter three, tannic acid is introduced as an additional carbon precursor alongside the best graphitization catalyst we found in the previous chapter, FeCl₃, to significantly improve carbon yield and structural retention and generate hierarchical, high-surface-area 3D carbon architectures with enhanced ion accessibility and electrochemical performance.Chapter four further improves electrode performance by growing a secondary pseudocapacitive polydiaminonaphthalene (PDAN) layer on our 3D carbon electrodes, which synergistically enhances charge storage through combined electric double-layer and redox mechanisms. This integrated strategy demonstrates a scalable route to high-performance 3D electrodes with improved capacitance, structural integrity, and tunable electrochemical properties, offering a promising pathway for next-generation energy storage systems.In summary, we demonstrate a facile post-processing catalyst infiltration strategy that enhances the carbon conversion ratio while preserving the intricate structures of 3D-printed polymer electrodes. Moreover, the asprepared 3D carbon electrode can serve as an ideal scaffold for integrating active materials, such as conducting polymers, to further improve electrochemical performance. This approach provides a promising material for developing scalable, sustainable, and high-performance electrodesin energy storage applications.