- Main
A study on enhanced electrochemical stability in water electrolysis components, via stoichiometry tuned atomic layer deposited films
- Wang, Kesong
- Advisor(s): Bandaru, Prabhakar PB;
- Kummel, Andrew AK
Abstract
This dissertation explores advanced surface engineering strategies to enhance the corrosion resistance of metallic components in proton exchange membrane (PEM) water electrolyzers, with a focus on replacing costly titanium (Ti) with more abundant and thermally conductive aluminum (Al). Through the application of atomic layer deposition (ALD) techniques, conformal and robust titanium oxide (TiOx) coatings were developed and optimized to provide long-term protection under industrially relevant electrochemical conditions, low pH, high voltage (>2.4 V), and elevated temperature (up to 80°C).The chapter two demonstrates that pinhole-free, oxygen-vacancy-rich TiOx coatings significantly improve the corrosion resistance of Al substrates, achieving dissolution rates as low as ~6 nm per year and enabling projected lifetimes of up to 60,000 hours for PEM anode current collectors. The chapter three extends this approach to complex geometries, applying a multi-step surface treatment including electropolishing, O2 treatment, and a multi-layer ALD structure on Al gas diffusion layer components, reducing corrosion rates by four orders of magnitude. The chapter four focuses on Ti itself, showing that thin ALD TiOx coatings drastically reduce corrosion and current degradation, achieving a five orders of magnitude improvement in current stability compared to uncoated Ti.Collectively, these studies offer a scalable and cost-effective pathway to substitute Ti with Al in critical electrolyzer components, while extending device longevity through nanoscale engineering of corrosion-resistant coatings. This work advances the deployment of affordable hydrogen production technologies by addressing material limitations in PEM electrolyzer systems.