Skip to main content
eScholarship
Open Access Publications from the University of California

Scholarly Works (15 results)

  • Thesis
  • Peer Reviewed
UC Berkeley Electronic Theses and Dissertations (2015)

This dissertation describes the results of research into some of the subtle and not-so-subtle factors that govern slow magnetic relaxation in lanthanide and actinide complexes. Single-molecule magnetism is only now entering its third decade, while the lanthanides and actinides in particular have only been a part of the field for about the last decade and half a decade, respectively. Within this time, the study of slow magnetic relaxation in f-element systems has proven to be a rich and complex area of research. Chapter 1 sets out to provide some historical context for the state of the f-elements in the field today as well as to highlight some of the most impressive systems in the literature. Some of the themes introduced in Chapter 1 will be relevant to the research discussed in subsequent chapters.

Chapter 2 describes the detailed magnetic characterization of U(H2BPz2)3, only the second actinide molecule found to exhibit slow magnetic relaxation, in magnetically dilute form. The results of variable-temperature and variable-field ac susceptibility measurements reveal that dipolar interactions are implicit in speeding up molecular slow relaxation and also facilitate very slow intermolecular relaxation that leads to magnetic hysteresis at low temperatures. When placed in the context of some relevant literature, the results of this study suggest that the intermolecular relaxation and observed hysteresis may be unrecognized, though common, phenomena among low-nuclearity U(III) molecules exhibiting slow magnetic relaxation.

Chapter 3 describes a detailed study of the role of donor atom influence and dipolar interactions on slow magnetic relaxation in two series of uranium and lanthanide compounds with nitrogen and carbon donor atoms, respectively. Through a combination of magnetic susceptibility characterization and lanthanide M5,4-edge XANES, EPR, and 1H NMR spectroscopies, it is found that the carbon donor facilitates slower magnetic relaxation for all metal ions in the investigated temperature and frequency range. Thus, in addition to symmetry, the identity of the donor atom is revealed to be another tunable parameter in the design of f-element complexes exhibiting slow magnetic relaxation.

Chapter 4 describes full magnetic characterization of concentrated and magnetically dilute samples of the bis(cyclooctatetraenide) complex [Er(COT)2]−. The high symmetry ligand field afforded by the two (COT)2− groups leads to exceptionally slow magnetic relaxation for Er(III), with magnetic blocking at 9.25 K and magnetic hysteresis as high as 10 K. Magnetic dilution also leads to an unprecedented opening of the hysteresis loop for this molecule at low temperatures, demonstrating that dipolar or intermolecular interactions can affect slow magnetic relaxation in some anomalous ways, by analogy with Chapter 2.

Finally, Chapter 5 changes gears slightly and investigates slow magnetic relaxation in the series of (N2)3− radical-bridged complexes {[(Me3Si)2N)2Ln(THF)]2(μ-N2)K} (for Ln = Gd(III), Tb(III), Dy(III)). Inner-sphere coordination of the K+ counter-ion in these complexes leads to bending of the Ln-radical-Ln unit, which is planar in the previously reported parent complexes {[(Me3Si)2N)2Ln(THF)]2(μ-N2)}− exhibiting an outer-sphere potassium ion. While the parent complexes hold records for both blocking temperature and magnetic coupling strength, bending of the core in {[(Me3Si)2N)2Ln(THF)]2(μ-N2)K} introduces non-negligible intramolecular lanthanide-lanthanide coupling that competes with the lanthanide-radical interaction. This competition results in depressed magnetic moments and faster magnetic relaxation for the anisotropic lanthanides, revealing that even a seemingly simple counter-ion can be used to tune slow magnetic relaxation.

    Cover page: Slow Magnetic Relaxation in f-Element Complexes: A Tale of Dipolar Interactions, Symmetry, and Magnetic Hysteresis
    • Article
    • Peer Reviewed
    LBL Publications (2023)
    The ability to control thermal transport is critical for the design of thermal rectifiers, logic gates, and transistors, although it remains a challenge to design materials that exhibit large changes in thermal conductivity with switching ratios suitable for practical applications. Here, we propose the use of flexible metal-organic frameworks, which can undergo significant structural changes in response to various stimuli, to achieve tunable switchable thermal conductivity. In particular, we use molecular dynamics simulations to show that the thermal conductivity of the flexible framework Fe(bdp) (bdp2- = 1,4-benzenedipyrazolate) becomes highly anisotropic upon transitioning from the expanded to the collapsed phase, with the conductivity decreasing by nearly an order of magnitude along the direction of compression. Our results add to a small but growing number of studies investigating metal-organic frameworks for thermal transport.
      Cover page: Reversible Thermal Conductivity Switching Using Flexible Metal-Organic Frameworks.
      • Article
      • Peer Reviewed
      UC Berkeley Previously Published Works (2016)
      We present the synthesis and characterization of alkali metal salts of the new tetraanionic, tetrapodal ligand 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (A4[PY(CO2)4], A = Li(+), Na(+), K(+), and Cs(+)), via deprotection of the neutral tetrapodal ligand tetraethyl 2,2'-(pyridine-2,6-diyl)bis(2-methylmalonate) (PY(CO2Et)4). The [PY(CO2)4](4-) ligand is composed of an axial pyridine and four equatorial carboxylate groups and must be kept at or below 0 °C to prevent decomposition. Exposing it to a number of divalent first-row transition metals cleanly forms complexes to give the series K2[(PY(CO2)4)M(H2O)] (M = Mn(2+), Fe(2+), Co(2+), Ni(2+), Zn(2+)). The metal complexes were comprehensively characterized via single-crystal X-ray diffraction, (1)H NMR and UV-vis absorption spectroscopy, and cyclic voltammetry. Crystal structures reveal that [PY(CO2)4](4-) coordinates in a pentadentate fashion to allow for a nearly ideal octahedral coordination geometry upon binding an exogenous water ligand. Additionally, depending on the nature of the charge-balancing countercation (Li(+), Na(+), or K(+)), the [(PY(CO2)4)M(H2O)](2-) complexes can assemble in the solid state to form one-dimensional channels filled with water molecules. Aqueous electrochemistry performed on [(PY(CO2)4)M(H2O)](2-) suggested accessible trivalent oxidation states for the Fe, Co, and Ni complexes, and the trivalent Co(3+) species [(PY(CO2)4)Co(OH)](2-) could be isolated via chemical oxidation. The successful synthesis of the [PY(CO2)4](4-) ligand and its transition metal complexes illustrates the still-untapped versatility within the tetrapodal ligand family, which may yet hold promise for the isolation of more reactive and higher-valent metal complexes.
        Cover page: Synthesis and Characterization of a Tetrapodal NO4 4– Ligand and Its Transition Metal Complexes
        • Article
        • Peer Reviewed
        UC Berkeley Previously Published Works (2015)
        The recently reported series of divalent lanthanide complex salts, namely [K(2.2.2-cryptand)][Cp'3Ln] (Ln = Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm; Cp' = C5H4SiMe3) and the analogous trivalent complexes, Cp'3Ln, have been characterized via dc and ac magnetic susceptibility measurements. The salts of the complexes [Cp'3Dy](-) and [Cp'3Ho](-) exhibit magnetic moments of 11.3 and 11.4 μB, respectively, which are the highest moments reported to date for any monometallic molecular species. The magnetic moments measured at room temperature support the assignments of a 4f(n+1) configuration for Ln = Sm, Eu, Tm and a 4f(n)5d(1) configuration for Ln = Y, La, Gd, Tb, Dy, Ho, Er. In the cases of Ln = Ce, Pr, Nd, simple models do not accurately predict the experimental room temperature magnetic moments. Although an LS coupling scheme is a useful starting point, it is not sufficient to describe the complex magnetic behavior and electronic structure of these intriguing molecules. While no slow magnetic relaxation was observed for any member of the series under zero applied dc field, the large moments accessible with such mixed configurations present important case studies in the pursuit of magnetic materials with inherently larger magnetic moments. This is essential for the design of new bulk magnetic materials and for diminishing processes such as quantum tunneling of the magnetization in single-molecule magnets.
          Cover page: Record High Single-Ion Magnetic Moments Through 4f n 5d1 Electron Configurations in the Divalent Lanthanide Complexes [(C5H4SiMe3)3Ln]−
          • Article
          • Peer Reviewed
          UC Berkeley Previously Published Works (2024)
          Monomethylamine (NH2CH3), dimethylamine (NH(CH3)2), and trimethylamine (N(CH3)3) are important chemical feedstocks that are produced industrially as an azeotropic mixture and must be separated using an energy-intensive thermal distillation. While solid adsorbents have been proposed as alternatives to distillation for separating various industrial gas mixtures, methylamine separations remain largely unexplored in this context. Here, we investigate two isoreticular frameworks Cu(cyhdc) (cyhdc2- = trans-1,4-cyclohexanedicarboxylate) and Cu(bdc) (bdc2- = 1,4-benzenedicarboxylate) as prospective candidates for this challenging separation, motivated by the recent discovery that Cu(cyhdc) reversibly captures ammonia through a unique framework-to-coordination polymer phase change. Through a combination of gas adsorption and powder X-ray diffraction analyses, we find that Cu(cyhdc) and Cu(bdc) reversibly bind large quantities of mono- and dimethylamine through framework-to-coordination polymer phase change mechanisms, although both frameworks adsorb only moderate amounts of trimethylamine via physisorption. Single-crystal X-ray diffraction analysis of select mono- and dimethylamine containing phases suggests that the number of hydrogen bond donors available and the linker donor strength are key factors influencing amine uptake. Finally, investigation of the tricomponent adsorption behavior of both materials reveals that Cu(cyhdc) is selective for the capture of monomethylamine from a range of mono-, di-, and trimethylamine mixtures.
            Cover page: Methylamine Separations Enabled by Cooperative Ligand Insertion in Copper–Carboxylate Metal–Organic Frameworks
            • Article
            • Peer Reviewed
            UC Berkeley Previously Published Works (2016)
            The synthesis of new molecular complexes of U(2+) has been pursued to make comparisons in structure, physical properties, and reactivity with the first U(2+) complex, [K(2.2.2-cryptand)][Cp'3 U], 1 (Cp'=C5 H4 SiMe3 ). Reduction of Cp''3 U [Cp''=C5 H3 (SiMe3 )2 ] with KC8 in the presence of 2.2.2-cryptand or 18-crown-6 generates [K(2.2.2-cryptand)][Cp''3 U], 2-K(crypt), or [K(18-crown-6)(THF)2 ][Cp''3 U], 2-K(18c6), respectively. The UV/Vis spectra of 2-K and 1 are similar, and they are much more intense than those of U(3+) analogues. Variable temperature magnetic susceptibility data for 1 and 2-K(crypt) reveal lower room temperature χM T values relative to the experimental values for the 5f(3) U(3+) precursors. Stability studies monitored by UV/Vis spectroscopy show that 2-K(crypt) and 2-K(18c6) have t1/2 values of 20 and 15 h at room temperature, respectively, vs. 1.5 h for 1. Complex 2-K(18c6) reacts with H2 or PhSiH3 to form the uranium hydride, [K(18-crown-6)(THF)2 ][Cp''3 UH], 3. Complexes 1 and 2-K(18c6) both reduce cyclooctatetraene to form uranocene, (C8 H8 )2 U, as well as the U(3+) byproducts [K(2.2.2-cryptand)][Cp'4 U], 4, and Cp''3 U, respectively.
              Cover page: Expanding the Chemistry of Molecular U(2+) Complexes: Synthesis, Characterization, and Reactivity of the {[C5 H3 (SiMe3 )2 ]3 U}(-) Anion.
              • Article
              • Peer Reviewed
              UC Berkeley Previously Published Works (2023)
              The use of coordination complexes within covalent organic frameworks can significantly diversify the structures and properties of this class of materials. Here we combined coordination chemistry and reticular chemistry by preparing frameworks that consist of a ditopic (p-phenylenediamine) and mixed tritopic moieties-an organic ligand and a scandium coordination complex of similar sizes and geometries, both bearing terminal phenylamine groups. Changing the ratio of organic ligand to scandium complex enabled the preparation of a series of crystalline covalent organic frameworks with tunable levels of scandium incorporation. Removal of scandium from the material with the highest metal content subsequently resulted in a 'metal-imprinted' covalent organic framework that exhibits a high affinity and capacity for Sc3+ ions in acidic environments and in the presence of competing metal ions. In particular, the selectivity of this framework for Sc3+ over common impurity ions such as La3+ and Fe3+ surpasses that of existing scandium adsorbents.
                Cover page: Selective scandium ion capture through coordination templating in a covalent organic frameworkCreative Commons 'BY' version 4.0 license
                • Article
                • Peer Reviewed
                UC Berkeley Previously Published Works (2024)
                Mixed-valence dilanthanide complexes of the type (CpiPr5)2Ln2I3 (CpiPr5 = pentaisopropylcyclopentadienyl; Ln = Gd, Tb, Dy) featuring a direct Ln-Ln σ-bonding interaction have been shown to exhibit well-isolated high-spin ground states and, in the case of the Tb and Dy variants, a strong axial magnetic anisotropy that gives rise to a large magnetic coercivity. Here, we report the synthesis and characterization of two new mixed-valence dilanthanide compounds in this series, (CpiPr5)2Ln2I3 (1-Ln; Ln = Ho, Er). Both compounds feature a Ln-Ln bonding interaction, the first such interaction in any molecular compounds of Ho or Er. Like the Tb and Dy congeners, both complexes exhibit high-spin ground states arising from strong spin-spin coupling between the lanthanide 4f electrons and a single σ-type lanthanide-lanthanide bonding electron. Beyond these similarities, however, the magnetic properties of the two compounds diverge. In particular, 1-Er does not exhibit observable magnetic blocking or slow magnetic relaxation, while 1-Ho exhibits magnetic blocking below 28 K, which is the highest temperature among Ho-based single-molecule magnets, and a spin reversal barrier of 556(4) cm-1. Additionally, variable-field magnetization data collected for 1-Ho reveal a coercive field of greater than 32 T below 8 K, more than 6-fold higher than observed for the bulk magnets SmCo5 and Nd2Fe14B, and the highest coercive field reported to date for any single-molecule magnet or molecule-based magnetic material. Multiconfigurational calculations, supported by far-infrared magnetospectroscopy data, reveal that the stark differences in magnetic properties of 1-Ho and 1-Er arise from differences in the local magnetic anisotropy of the lanthanide centers.
                  Cover page: Coercive Fields Exceeding 30 T in the Mixed-Valence Single-Molecule Magnet (CpiPr5)2Ho2I3.
                  • Article
                  • Peer Reviewed
                  UC Berkeley Previously Published Works (2022)
                  Oxygen is a critical gas in numerous industries and is produced globally on a gigatonne scale, primarily through energy-intensive cryogenic distillation of air. The realization of large-scale adsorption-based air separations could enable a significant reduction in associated worldwide energy consumption and would constitute an important component of broader efforts to combat climate change. Certain small-scale air separations are carried out using N2-selective adsorbents, although the low capacities, poor selectivities, and high regeneration energies associated with these materials limit the extent of their usage. In contrast, the realization of O2-selective adsorbents may facilitate more widespread adoption of adsorptive air separations, which could enable the decentralization of O2 production and utilization and advance new uses for O2. Here, we present a detailed evaluation of the potential of metal-organic frameworks (MOFs) to serve as O2-selective adsorbents for air separations. Drawing insights from biological and molecular systems that selectively bind O2, we survey the field of O2-selective MOFs, highlighting progress and identifying promising areas for future exploration. As a guide for further research, the importance of moving beyond the traditional evaluation of O2 adsorption enthalpy, ΔH, is emphasized, and the free energy of O2 adsorption, ΔG, is discussed as the key metric for understanding and predicting MOF performance under practical conditions. Based on a proof-of-concept assessment of O2 binding carried out for eight different MOFs using experimentally derived capacities and thermodynamic parameters, we identify two existing materials and one proposed framework with nearly optimal ΔG values for operation under user-defined conditions. While enhancements are still needed in other material properties, the insights from the assessments herein serve as a guide for future materials design and evaluation. Computational approaches based on density functional theory with periodic boundary conditions are also discussed as complementary to experimental efforts, and new predictions enable identification of additional promising MOF systems for investigation.
                    Cover page: Metal-organic frameworks as O2-selective adsorbents for air separations
                    • Article
                    • Peer Reviewed
                    LBL Publications (2023)
                    Diamine-appended Mg2(dobpdc) (dobpdc4- = 4,4-dioxidobiphenyl-3,3-dicarboxylate) metal-organic frameworks have emerged as promising candidates for carbon capture owing to their exceptional CO2 selectivities, high separation capacities, and step-shaped adsorption profiles, which arise from a unique cooperative adsorption mechanism resulting in the formation of ammonium carbamate chains. Materials appended with primary,secondary-diamines featuring bulky substituents, in particular, exhibit excellent stabilities and CO2 adsorption properties. However, these frameworks display double-step adsorption behavior arising from steric repulsion between ammonium carbamates, which ultimately results in increased regeneration energies. Herein, we report frameworks of the type diamine-Mg2(olz) (olz4- = (E)-5,5-(diazene-1,2-diyl)bis(2-oxidobenzoate)) that feature diverse diamines with bulky substituents and display desirable single-step CO2 adsorption across a wide range of pressures and temperatures. Analysis of CO2 adsorption data reveals that the basicity of the pore-dwelling amine─in addition to its steric bulk─is an important factor influencing adsorption step pressure; furthermore, the amine steric bulk is found to be inversely correlated with the degree of cooperativity in CO2 uptake. One material, ee-2-Mg2(olz) (ee-2 = N,N-diethylethylenediamine), adsorbs >90% of the CO2 from a simulated coal flue stream and exhibits exceptional thermal and oxidative stability over the course of extensive adsorption/desorption cycling, placing it among top-performing adsorbents to date for CO2 capture from a coal flue gas. Spectroscopic characterization and van der Waals-corrected density functional theory calculations indicate that diamine-Mg2(olz) materials capture CO2 via the formation of ammonium carbamate chains. These results point more broadly to the opportunity for fundamentally advancing materials in this class through judicious design.
                      Cover page: Cooperative Carbon Dioxide Capture in Diamine-Appended Magnesium-Olsalazine Frameworks.
                      Top