UC Davis

The effects of shaking history on cone penetration test (CPT)-based liquefaction triggering correlations for clean saturated sand are examined by using cone penetration resistance and cyclic strength data pairs from dynamic centrifuge model tests. Three model tests on a 9-m-radius centrifuge examined the liquefaction responses of level profiles of saturated Ottawa F-65 sand subjected to multiple (17-29) shaking events that produced successive changes in density and model response characteristics. Inverse analysis of data from dense accelerometer arrays were used to define time series of cyclic stress ratios and shear strains throughout the profile. Cyclic resistance ratios against triggering of ~100% excess pore pressure ratio in 15 equivalent uniform cycles were computed at multiple depths based on weighting of the cyclic stress ratio time series up to the time of triggering. Cone penetration tests performed at select times during each model test were used to define the variation in cone tip resistances with depth and shaking history. The resulting data pairs, with normalized cone tip resistances ranging from 20 to 340 and cyclic resistance ratios ranging from 0.1 to 2.0, show that both quantities progressively increase as a result of recurrent liquefaction events and generally follow the trends predicted by case history-based liquefaction triggering correlations. Three 1-m-radius centrifuge tests of similar configurations produced consistent results. Implications for the interpretation of case histories and engineering practice are discussed.