- Main
Interfacial Design and Modification for Next-Generation Lithium-Ion Batteries
- Shang, Ruoxu
- Advisor(s): Ozkan, Cengiz CO;
- Ozkan, Mihrimah MO
Abstract
In recent years, the trend of replacing traditional fuel vehicles with electric vehicles has become increasingly evident worldwide, aiming to reduce automobile exhaust emissions and address the gradual depletion of petroleum resources. However, traditional lithium-ion batteries are currently facing various problems which seriously hinder their further development. For example, the energy density of traditional lithium-ion batteries has reached a limit of about 300Wh/kg, which seriously limits the mileage of electric vehicles on a single charge. For another example, battery electrolyte is an organic liquid, which is flammable and poses a safety hazard. In order to solve these issues, the development of next-generation rechargeable batteries is imminent.In order to improve battery capacity, the development and application of high-nickel cathodes have attracted much attention. Among them, LiNi0.8Mn0.1Co0.1O2 (NMC811) gains a lot of interest, because it has a capacity of more than 200 mAh/g and a wide chemical window. However, NMC811 has not yet been commercialized due to the following problems: (1) Irreversible phase transition under high voltage. (2) Parasitic reactions at interface. (3) Hydrofluoric acid attack during cycling. Another type of new battery is lithium-sulfur batteries, which have a theoretical capacity of up to 1675 mAh/g. However, the shuttle effect of lithium-sulfur batteries leads to a significant reduction in its capacity and short cycle life. Besides, in order to solve the safety issue, solid electrolytes and all-solid-state batteries have attracted widespread attention. However, solid-state batteries currently also have some problems: (1) Battery short circuit caused by lithium dendrite growth. (2) Serious side reactions at the electrode-electrolyte interface. (3) Low electrolyte ionic conductivity. (4) Narrow electrolyte electrochemical window. (5) Poor contact between electrolyte and active materials in the cathode. These problems of the next-generation batteries can be improved by designing and modifying the electrode interface. In this study, we used nano-deposition technologies such as atomic layer deposition and magnetron sputtering to tailor the interface of high-nickel cathode, lithium-sulfur battery and all-solid-state battery, and improved the performance significantly. This also provides ideas and inspiration for other researchers and the commercialization of next-generation batteries.