New sources of clean water are currently being researched and implemented, to face global water shortage. Techniques such as desalination or cloud seeding can have a high yield but present problems such as excessive energy consumption or consistent environmental impacts. Fog harvesting stands out for being considerably simpler and inexpensive compared to the previous. In the last decades researchers have developed detailed studies and numerical models, supported by a number of successful examples located mainly in arid or seasonally arid climates. This study surveys existing methods to collect water from fog, such as drop coalescence on vertically placed meshes, chemical absorption and desorption and radiative condensers. Yields from different collectors are compared and some considerations on influencing climatic factors are discussed, suggesting that radiative systems may be applied on building envelopes as collection devices. A follow-up paper will present experimental results on applying radiative collection systems in buildings.

Fano resonance refers to an interference between localized and continuum states that was firstly reported for atomic physics and solid-state quantum devices. In recent years, Fano interference gained more and more attention for its importance in metamaterials, nanoscale photonic devices, plasmonic nanoclusters and surface-enhanced Raman scattering (SERS). Despite such interest in nano-optics, no experimental evidence of Fano interference was reported up to now for purely nanomechanical resonators, even if classical mechanical analogies were referred from a theoretical point of view. Here we demonstrate for the first time that harmonic nanomechanical resonators with relatively high quality factors, such as cantilevers vibrating in vacuum, can show characteristic Fano asymmetric curves when coupled in arrays. The reported findings open new perspectives in fundamental aspects of classical nanomechanical resonators and pave the way to a new generation of chemical and biological nanoresonator sensors with higher parallelization capability.

Spin-polarized directive coupling of light associated with the photonic quantum spin-Hall effect (QSHE) is a nanoscale phenomenon based on strong spin–orbit interaction that has recently attracted significant attention. Herein, we discuss the experimental manifestation of QSHE intrinsic in the Bloch waves associated with a bound state in the continuum (BIC) of a dielectric photonic crystal metasurface (PhCM). We show numerically that BICs in nanoscale PhCMs have photonic spin angular momentum density transverse to the orbital momentum not only at the interfaces but also inside the confining dielectric medium. Then, we experimentally demonstrate that the fundamental Bloch waves of the BIC mode, macroscopically amplified on resonance, propagate along the symmetry axes of the PhCM obeying spin-momentum locking also at normal incidence, i.e., with no symmetry breaking. This BIC-enhanced spin-directive coupling of light may enable versatile implementations of spin-optical structures, paving the way for novel photonic spin multiplatform devices.

Fog harvesting stands out as a simple and inexpensive form to produce drinkable water from alternative sources, when compared to other available techniques. This paper presents results from a set of experiments performed on radiative condensers, deemed as a promising system to be integrated in building envelopes, following a literature review on fog condensers presented in a previous work. An analysis of condensation potential obtained using high emissivity substrates and titanium dioxide nanocoatings is presented, as well as the influence of sample position and orientation, and impact of climatic variables. Finally, the role of nanotechnology in overcoming limitations of radiative systems is discussed as a means to increase harvesting efficiency with functionalized, engineered nano-patterns on collector surface. Based on biomimicry principles, nanocoatings including nanoscale 3D optimal geometries are discussed, and the use of nanoimprint technology (NIL) is proposed to massively produce nano-patterned panels with biomimetic fog capturing features.

Moving the polarization of the incident wave along a meridian of the Poincaré sphere, experimentally we show that the coupling with the fundamental Bloch's surface waves of the mode, provide a spatially coherent, macroscopic spinmomentum locked propagation along the symmetry axes of the PhCM. This novel mechanism of light-spin manipulation enables a versatile implementation of spin-optical structures that may pave the way to novel strategies for light spin technology and photonic multiplatform implementations.

Any metrology tool is only as good as it is calibrated. The characterization of metrology systems requires test patterns at a scale about ten times smaller than the measured features. The fabrication of patterns with linewidths down to 1.5 nm is described. The test sample was designed in such a way that the distribution of linewidths appears to be random at any location. This pseudorandom test pattern is used to characterize dimensional metrology equipment over its entire dynamic range by extracting the modulation transfer function of the system. The test pattern contains alternating lines of silicon and tungsten silicide, each according to its designed width. The fabricated test samples were imaged using a transmission electron microscope, a scanning electron microscope, and an atomic force microscope.

Materials for nanophotonic devices ideally combine ease of deposition, very high refractive index, and facile pattern formation through lithographic templating and/or etching. In this work, we present a scalable method for producing high refractive index WS₂ layers by chemical conversion of WO₃ synthesized via atomic layer deposition (ALD). These conformal nanocrystalline thin films demonstrate a surprisingly high index of refraction (n > 3.9), and structural fidelity compatible with lithographically defined features down to ~10 nm. Although this process yields highly polycrystalline films, the optical constants are in agreement with those reported for single crystal bulk WS₂. Subsequently, we demonstrate three photonic structures - first, a two-dimensional hole array made possible by patterning and etching an ALD WO₃ thin film before conversion, second, an analogue of the 2D hole array first patterned into fused silica before conformal coating and conversion, and third, a three-dimensional inverse opal photonic crystal made by conformal coating of a self-assembled polystyrene bead template. These results can be trivially extended to other transition metal dichalcogenides, thus opening new opportunities for photonic devices based on high refractive index materials.

One of the major challenges to the widespread adoption of plasmonic and nano-optical devices in real-life applications is the difficulty to mass-fabricate nano-optical antennas in parallel and reproducible fashion, and the capability to precisely place nanoantennas into devices with nanometer-scale precision. In this study, we present a solution to this challenge using the state-of-the-art ultraviolet nanoimprint lithography (UV-NIL) to fabricate functional optical transformers onto the core of an optical fiber in a single step, mimicking the 'campanile' near-field probes. Imprinted probes were fabricated using a custom-built imprinter tool with co-axial alignment capability with sub <100 nm position accuracy, followed by a metallization step. Scanning electron micrographs confirm high imprint fidelity and precision with a thin residual layer to facilitate efficient optical coupling between the fiber and the imprinted optical transformer. The imprinted optical transformer probe was used in an actual NSOM measurement performing hyperspectral photoluminescence mapping of standard fluorescent beads. The calibration scans confirmed that imprinted probes enable sub-diffraction limited imaging with a spatial resolution consistent with the gap size. This novel nano-fabrication approach promises a low-cost, high-throughput, and reproducible manufacturing of advanced nano-optical devices.