UC Davis

Theoretical predictions for broadband noise generated by rotors with serrated trailing edges are presented. This study extends Lyu and Ayton’s model for serrated trailing-edge noise to account for factors such as finite span length, the accurate acoustic attenuation rate of trailing-edge noise, modified spanwise wavenumber, and the proper scattering factor. This new model is implemented in the rotorcraft broadband noise tool, UCD‐QuietFly. The validation results demonstrate a satisfactory level of agreement with the experimental data for serrated trailing‐edge noise of a wing section, a hovering rotor, and a forward‐flight rotor. Next, the effects of serration parameters, such as the number of serrations, serrations starting radial location, serration geometry, and serration height, on rotor broadband noise are investigated. For example, it is observed that sine-wave, chopped peak, or sawtooth serration shapes provide the most significant noise reduction among the various shapes considered. Finally, broadband noise reduction through serrations is applied to two urban air mobility aircraft scenarios: a six‐passenger quadrotor and a quiet helicopter. For the quadrotor, serrated trailing edges show a noise reduction potential of over 9 dB, with higher reductions observed at higher tip speeds and fewer blades. A quiet helicopter equipped with serrated blades in forward flight achieves a maximum noise reduction of over 10 dB in the forward direction.