Skip to main content
eScholarship
Open Access Publications from the University of California

Harmonic cascade FEL designs for LUX

  • Author(s): Penn, G.
  • Reinsch, M.
  • Wurtele, J.
  • Corlett, J.N.
  • Fawley, W.M.
  • Zholents, A.
  • Wan, W.
  • et al.
Abstract

LUX is a design concept for an ultrafast X-ray science facility, based on an electron beam accelerated to GeV energies in a recirculating linac. Included in the design are short duration (200 fs or shorter FWHM) light sources using multiple stages of higher harmonic generation, seeded by a 200-250 nm laser of similar duration. This laser modulates the energy of a group of electrons within the electronbunch; this section of the electron bunch then produces radiation at a higher harmonic after entering a second, differently tuned undulator. Repeated stages in a cascade yield increasing photon energies up to 1 keV. Most of the undulators in the cascade operate in the low-gain FEL regime. Harmonic cascades have been designed for each pass of the recirculating linac up to a final electron beam energy of 3.1 GeV. For a given cascade, the photon energy can be selected over a wide range by varying the seed laser frequency and the field strength in the undulators. We present simulation results using the codes GENESIS and GINGER, as well as the results of analytical models which predict FEL performance. We discuss lattice considerations pertinent for harmonic cascade FELs, as well as sensitivity studies and requirements on the electron beam.

Main Content
Current View