Skip to main content
eScholarship
Open Access Publications from the University of California

UC Berkeley

UC Berkeley Electronic Theses and Dissertations bannerUC Berkeley

Electrochemical Sensors for Molten Fluoride Salt Loop Operations, Redox Monitoring, and Corrosion Product Quantification

Abstract

Molten fluoride salts are enabling materials for advanced nuclear energy systems, high-temperature heat transport, and chemical processing because they can operate at temperatures and chemical conditions inaccessible to conventional aqueous systems. In molten salt reactors and related test systems, however, the salt chemistry continuously evolves as structural materials corrode, impurities are introduced, redox-active species change oxidation state, and thermal gradients create spatial variation in composition. Conventional analytical methods provide valuable compositional information but generally require ex situ sampling and therefore cannot continuously track an operating system. The goal of this dissertation is to develop and evaluate electrochemical sensing methodologies and deployment strategies capable of monitoring molten fluoride salt chemistry under increasingly representative operating conditions.To connect electrochemical measurements to reactor-relevant deployment, this work first examines molten salt system design and operation. A FLiBe transfer system was designed and operated with the goal of partitioning salt in its molten state. Temperature and mass-transfer measurements were collected during operation. The process data provides both operational control and system diagnostics information using thermocouple signals, gravimetric sensors, and gas-flow measurements. These results informed the design of a NaF-BeF2 natural circulation loop for corrosion, chemistry, and electrochemical sensing studies.Electrochemical sensor hardware was developed for molten fluoride salt experiments with emphasis on implementing a reference electrode for redox potential and quantifying corrosion product concentrations. A replaceable wire-electrode probe and printed electrode chip were designed, fabricated, and tested in aqueous ferricyanide solution and molten salts. The probe produced interpretable open-circuit potential, cyclic voltammetry, and impedance measurements, demonstrating its use as a functional electrochemical platform while showing that surface-area calibration, reference stability, and ohmic-drop correction are necessary for quantitative interpretation. The electrode chip devices produced valid aqueous responses, but high-temperature and molten-salt tests revealed delamination, adhesion failure, and packaging limitations.Redox measurements in FLiNaK and FLiBe were used to evaluate practical reference electrode concepts for high-temperature fluoride salts. Potassium dynamic reference measurements in FLiNaK-CrF3 provided an internal potential scale at low chromium concentrations but became limited by material and operational failures at higher additions. In FLiBe, Ni/NiF2, Ag/AgF, and Be/BeF2 redox couples were evaluated in their usability and limitations. The Be dynamic reference electrode mechanistic insights are given with respect to relaxation behavior with a locally modified LiF-BeF2 interfacial composition.Finally, chronopotentiometry, cyclic voltammetry, and square-wave voltammetry were applied to dissolved corrosion product quantification. The FLiNaK-CrF3 dataset demonstrated that chromium electrochemistry is quantitative but only with explicit treatment of ohmic drop, activity coefficients, well defined electroactive surface area, and identifying ranges of linearity with bulk concentration. Square-wave voltammetry in FLiBe detected changes in impurity chemistry after oxidant and material additions, but quantitative peak assignments require well controlled electrode surface areas, internal references, and post-test characterization. Collectively, this dissertation shows that electrochemical sensing can provide meaningful in situ information on molten salt redox state and corrosion-product chemistry when the sensor, reference electrode, and cell geometry are designed to account for the thermochemistry and transport regime found in a prototypical molten salt reactor environment.